Published By Environment and Science
Issued over 6 years ago
Summary
Description
This dataset represents version three of the Nature Conservation (Koala) Conservation Plan 2006 and Management Program 2006-2016 (the Koala Plan). See additional information also.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
SEQKPA (Version 1.2) maps both Assessable Development Areas and Koala Habitat Values over the seven most populous local government divisions of South East Queensland. This area is defined as the South East Queensland Koala Protection Area. The Assessable Development Area defines where the development assessment requirements of the South East Queensland Koala Conservation State Planning Regulatory Provisions (Koala SPRP) apply. See additional information also.
Published By State Development, Manufacturing, Infrastructure and Planning
Issued over 6 years ago
Summary
Description
Land for Public Recreation is current as at the date of the last reference in the Open Data listings and should be considered as a point in time dataset. This dataset formed part of a previous government initiative which has been discontinued. It is not currently supported and will not undergo any further development or be part of any ongoing update schedule.Land for public recreation is the July 2011 Baseline dataset for which all subsequent analysis will be based on. The dataset contains filtered ATS Reserve, Leasehold and Queensland Outdoor and Recreation Federation (QORF) dataset.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
Foliage Projective Cover (FPC) is the percentage of ground area occupied by the vertical projection of foliage. The Remote Sensing Centre FPC mapping is based on regression models applied to dry season (May to October) Landsat-5 TM, Landsat-7 ETM and Landsat-8 OLI imagery for the period 1988-2014. An annual woody spectral index image is created for each year using a multiple regression model trained from field data collected mostly over the period 1996-1999. A robust regression of the time series of the annual woody spectral index is then performed. The estimated foliage projective cover is the prediction at the date of the selected dry season image for 2014. Where this deviates significantly from the woody spectral index for that date, further tests are undertaken before this estimate is accepted. In some cases, the final estimate is the woody spectral index value rather than the robust regressionprediction. The product is further masked to remove areasclassified as non-woody (see Landsat Woody Vegetation Extent - Queensland 2014). Corrections have been applied to remove errors due to topographic effects, cloud, cloud shadow, water, cropping, and regrowth following clearing. Some errors may remain. The product was generated from WRS-2 path/row scenes obtained from the United States Geological Survey (USGS).
Published By Environment and Science
Issued over 6 years ago
Summary
Description
The Landsat Woody Vegetation Extent -Queensland 2014 provides an estimate of the extent of woody vegetation across the state. An annual woody spectral index image is created from 1988 to 2014 using multiple regression trained from field data collected mostly over the period 1996-1999. Characteristics of the time series of these images are used in a tree based classification to produce a prediction of woody/non-woody vegetation. The product was generated from WRS-2 path/row scenes obtained from the United States Geological Survey (USGS).While some land cover change may be detected in the woody extent dataset, this product is not designed to generate clearing or regrowth layers, and should not be used to assess clearing or be compared with previous years for change monitoring. The Statewide Landcover and Trees Study (SLATS) produces accurate woody vegetation clearing layers for this purpose.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
This dataset displays the individual tile footprints and capture specifications for the currently available LiDAR captured data over for the State of Queensland. In areas where multiple LiDAR projects overlap, the data can be drilled down to display the data from each project.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
The spatial representation of local government division boundaries in Queensland for the purposes of the 2016 local government elections.Following the conclusion of the 2016 local government elections, these boundaries will become the current and actual boundaries for Queensland local government divisional areas.
Published By Agriculture and Fisheries
Issued over 6 years ago
Summary
Description
The approved sites managed by Forest Products,Department of Agriculture and Fisheries under the Forestry Act 1959 where apiaries (beehives) can be placed on State Forests or Timber Reserves.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
The mangrove mapping is based on 1955 aerial photography and supported by field survey of 1997 mangrove mapping (Dowling and Stephens, 2001). Linework produced at a scale greater than 1:5,000 should be used as a guide only. The positional accuracy of the data, mapped at a scale of 1:5,000, is 20 metres.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
The mangrove mapping is based on 1997 aerial photography and supported by field survey of 1997 mangrove mapping (Dowling and Stephens, 2001). Linework reproduced at a scale greater than 1:5,000 should be used as a guide only. The positional accuracy of the data, mapped at a scale of 1:5,000, is 5 metres.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
The mangrove mapping is based on mosaics of high resolution 2012 aerial photograph (ecw format) and supported by field survey of 1998 mangrove mapping (Dowling and Stephens, 2001). Linework reproduced at a scale greater than 1:5,000 should be used as a guide only. The positional accuracy of the data, mapped at a scale of 1:5,000, is 5 metres.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
A geodatabase of modelled potential habitat shapefiles for selected threatened and priority species in Queensland has been created using MAXENT (v 3.3.3k).
Published By Environment and Science
Issued over 6 years ago
Summary
Description
This dataset consists of the six confirmed artificial reefs locations in Moreton Bay Marine Park: Harry Atkinson Artificial Reef, Wild Banks Artificial Reef, North Moreton Artificial Reef, South Stradbroke Artificial Reef, West Peel Artificial Reef and East Coochie Artificial Reef.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
Benthic habitat mapping of Moreton Bay, from Comboyuro Point to Jacobs Well. Mapping conducted as part of the Ecosystem Health Monitoring Program.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
This dataset shows the boundaries used in the natural resource management regional funding programs. They reflect the area covered by each of the regional NRM bodies of the Community and Government partnership responsible for protecting and managing Queensland's natural resources.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
High risk areas, under the Nature Conservation Act 1992, where plants classed as endangered, vulnerable or near threatened wildlife are present or are likely to be present.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
This dataset is based on the GeoScience Australia 1:100,000 drainage network of Queensland (where 1:100,000 coverage exists) and has streams connected and directionalised with reaches ordered using Strahler method of stream ordering.This dataset allows you to extract your area of interest using the 'clip, zip and ship' functionality. You can select areas by local government area, city or suburb (locality) or freehand over small areas. You cannot download the entire State in one single order. Instructions for extracting data can be found in the help pages.
Published By Agriculture and Fisheries
Issued over 6 years ago
Summary
Description
The Pest Central pest animal dataset contains detailed spatial information on pest animal management activities in Queensland.
Published By Agriculture and Fisheries
Issued over 6 years ago
Summary
Description
The Pest Central weed dataset contain detailed spatial information on weed management activities in Queensland.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
This dataset contains point features representing the centre of current location addresses and their corresponding property descriptor that have been sourced from the property address database.This dataset cannot be downloaded as a whole of State because it is too large. Use the clip, zip and ship method.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
This dataset was developed for the purpose of supporting the Queensland Biodiversity Environmental Offset Policy 2011, which is now superseded. This document describes the process used to create the Biodiversity Planning Assessment-derived Offsets Special Feature datasets that were to be utilised in an offsets metric when required under the previous policy. The Queensland Government Vegetation and Biodiversity Offset Metric Methodology to Determine Ecological Equivalence (the Metric) outlined 14 special feature criteria that were to be considered when determining the ecological equivalence of a proposed development site and offset site. The Biodiversity Planning Assessments (BPAs) provided 12 of these special features, and this dataset contained the ratings and scores for these special features. These special features included BPA Criteria H (priority species ), Criteria I (special biodiversity value areas), and Criteria J (corridors). For bioregions without a BPA, surrogate datasets were developed and included.'
Published By Agriculture and Fisheries
Issued over 6 years ago
Summary
Description
The Queensland Fisheries 30nm reporting grids is an overlay of 30nm x 30nm grids across Queensland. These grids represent how the commercial fisherman report the location of their daily catch and effort. It covers all of the marine and freshwater Queensland jurisdiction.
Published By Agriculture and Fisheries
Issued over 6 years ago
Summary
Description
The Queensland Commercial Fishery 6 Minute Reporting Grid.
Published By Environment and Science
Issued over 6 years ago
Summary
Description
Queensland Instream Structure Inventory Data - EXTRACT. Data was collected during projects undertaken by Fisheries Queensland, and funded by the Department of Sustainability, Environment, Water, Population and Communities (SEWPaC) under the Queensland Wetlands Program (the Program). Projects implemented a framework, including fish habitat guidelines and a decision support system, developed by Fisheries Queensland in the pilot project (2008/09). See additional information also.
Published By Natural Resources, Mines and Energy
Issued over 6 years ago
Summary
Description
The Queensland Floodplain Assessment Overlay (QFAO) represents a floodplain area within drainage sub-basins in Queensland. It has been developed for use by local governments as a potential flood hazard area. It represents an estimate of areas potentially at threat of inundation by flooding. The data has been developed through a process of drainage sub-basin analysis utilising data sources including 10 metre contours, historical flood records, vegetation and soils mapping and satellite imagery. This data represents an initial assessment and will be subject to refinement by respective Local Government Authorities.