Summary

Summary

Description

Bathythermograph data were collected from the DUANE within a 1-mile radius of Ocean Weather Station D (4400N 04100W) and in transit. Data were collected by the United States Coast Guard from 06 August 1966 to 30 August 1966. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Summary

Summary

Summary

Description

CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are collected at select nearshore locations, both around islands or banks and within lagoons. Data processing was performed using Seabird Instrument's SeaSoft SBE Data Processing Software (http://www.seabird.com/software/SBEDataProcforWindows.htm). Data format is discreet, tabular (formatted, space delimited ASCII) files for each profile, with a full header as provided by SeaSoft. Raw file extension is HEX, processed file extension is CNV. The header contains latitude, longitude and other location information, as well as all data processing steps and settings. All dates and times are UTC. All positions are WGS84 decimal degrees. Contact Coral Reef Ecosystem Division (CRED), NOAA Pacific Island Fisheries Science Center for more information. http://www.pifsc.noaa.gov/cred/oceanography.php

Summary

Summary

Summary

Description

The NOAA Hypoxia Watch project provides near-real-time, web-based maps of dissolved oxygen near the sea floor over the Texas-Louisiana continental shelf during a period that extends from early June to mid-July. The NOAA National Marine Fisheries Service Mississippi Laboratories at Pascagoula and Stennis Space Center and the NOAA National Coastal Data Development Center (NCDDC) at Stennis Space Center began the Hypoxia Watch project in 2001. Scientists aboard the NOAA Research Vessel Oregon II measure seawater properties, such as water temperature, salinity, chlorophyll, and dissolved oxygen at each of approximately 240 locations as the Oregon II cruises the waters south of Pascagoula, MS and then makes its way from Brownsville, Texas, to the mouth of the Mississippi River. A scientist aboard the ship processes the measurements from electronic dissolved oxygen sensors, checks the measurements periodically with chemical analyses of the seawater, then sends the data by e-mail to NCDDC at Stennis Space Center approximately every three to five days. Physical Scientists at NCDDC transform the dissolved oxygen measurements into contour maps, which identify areas of low oxygen, or hypoxia. During the 6-week cruise, as the data is received from the ship, NCDDC generates new maps and immediately publishes them on the web. The first map will usually cover an area off the Mississippi coast, successive maps will add areas of the continental shelf from Brownsville to Galveston, and the final map will usually cover the entire Texas-Louisiana-Mississippi coast. Maps are published every three to five days from approximately June 10 to July 20.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

These data represent data collected from the Shipboard Environmental (data) Acquisition System (SEAS), a program developed by National Oceanic and Atmospheric Administration (NOAA) to provide accurate meteorological and oceanographic data in real time from ships at sea through the use of satellite data transmission techniques. The system transmits data through either the Geostationary Operational Environmental Satellite (GOES) or the International Maritime Satellite Organization (INMARSAT C) satellites to NOAA for use in weather, climatological and ocean models. NOAA is actively participating in an international effort to increase the number of subsurface temperature observations in support of global oceanographic and climate studies. NOAA's Expendable Bathythermograph (XBT) program, SEAS, currently supports about 80 Voluntary Observing Ships (VOS). SEAS XBT data are archived by the National Oceanographic Data Center (NODC) on a weekly basis.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

This multibeam backscatter sonar image of the sea floor (0-200 m water depths) was mosaiced from data collected fromvarious mapping efforts each October from 2001-2004. Reson 8101 (240 kHz) and Reson 8125 (455kHz) multibeam echosounders werehull mounted to survey launches and deployed from the NOAA ship Rainier. Either Trimble or CSI wireless DGPS were used forlaunch positioning. TSS or Applanix Pos/MV were used to compensate for vessel motion. A Seabird SVP 19 plus was used to correctfor sound velocity refraction. Navigation and line planning were accomplished with Hypack. Sonar packets, motion sensor, andnavigation data were logged in Isis Sonar as XTF files. Backscatter was normalized using propietary software developed by theUniversity of New Brunswick Ocean Mapping Group.

Summary

Summary

Summary

Description

This image represents a 4 meter resolution backscatter mosaic of a seamount/bank East of Fajardo, Puerto Rico. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in and around the Northeast Reserve from 3/05/2013 to 3/29/2013. Data was acquired with a hull mounted Kongsberg EM1002 multibeam echosounder (95 kHz) and processed by a NOAA contractor using CARIS HIPS software, applying all relevant correctors (attitude, sound velocity, absorption coefficient). Data is in UTM zone 20 north, datum NAD83. The backscatter component of the bathymetry data were geometrically and radiometrically corrected in CARIS HIPS Mosaic Editor. Acoustic backscatter mosaics are an important piece of information when characterizing surficial seafloor features and delineating benthic habitats. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Summary

Description

The U.S. Geological Survey (USGS) contracted with Hawaii-based Aerial Surveying, Inc. to collect lidar-derived elevation data over the low-lying areas within the northwestern Hawaiian Islands (NWHI) during the summer of 2010. A separate contract issued to Aerial Surveying, Inc. by the National Oceanic and Atmospheric Administration (NOAA) funded the lidar data processing and elevation data product development phases of the project. Lidar data provide high resolution digital elevation models that are used for many applications, including but not limited to sea level rise modeling, habitat assessments, and tsunami inundation modeling. In April 2011, NOAA Papahanaumokuakea Marine National Monument and NOAA Office for Coastal Management deployed a survey crew to the NWHI to collect high accuracy point data to validate the 2010 lidar data. The survey crew used survey-grade Global Positioning System (GPS) receivers to collect high accuracy elevation points. This metadata covers the information for Laysan Island. This dataset contains lidar point clouds in LAS 1.2 format, classified in the following ASPRS standards as Class 1: Unclassified, Class 2: Ground, and Class 9: Water. The following are the equipment used to create the lidar data sets. Aircraft: Beechcraft Queen Air Lidar Systems: Riegl 140 and 240 Accuracy statements are based on areas of open terrain, with points classified as ground. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas. Classified data sets such as this one may have varying posting due to some pulses not reaching the ground. This work was conducted under permit number PMNM-2010-033 as approved by NOAA, the U.S. Fish and Wildlife Service (USFWS), and the State of Hawaii, and acknowledged by Dr. Charles L. Littnan of NOAA's Pacific Islands Fisheries Science Center.

Summary

Description

The U.S. Geological Survey (USGS) had a requirement for high resolution Lidar needed for mapping the Brooks Camp region of Katmai National Park in Alaska. Aero-Metric, Inc. (AeroMetric) acquired highly accurate Lidar data for an area that comprises of approximately 17.5 square miles for the USGS. This acquisition was carried out to satisfy the need for high resolution elevation data in the region. A Leica ALS70 Lidar system was used in the collection of data for this project. This project involves new Lidar data acquisition at an approximate pulse spacing of 0.6 meters. This data was to be calibrated such that all systematic errors were accounted for. The project required bare-earth classification and hydroenforcement of water bodies for the production of contours and digital elevation models. Data was to conform to a vertical accuracy of 18.5 cm RMSE in open terrain. The accuracy as tested and published in this report has met vertical accuracy requirements as specified by the client.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.