Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

Temperature and salinity profile data were collected using STD/CTD casts from MOANA WAVE in the Pacific Ocean from February 22, 1975 to May 27, 1975. Data were submitted by Scripps Institution of Oceanography as part of the International Decade of Ocean Exploration / North Pacific Experiment (IDOE/NORPAX) project. Data were processed by NODC to the NODC standard High-Resolution STD/CTD Data (F022) format. Full F022 format descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/f022.html. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Summary

Description

Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of water temperature at coral reef sites. Data is typically collected at 1800 second intervals for a duration of 2 years using a SBE39 Temperature Recorder (Sea-Bird Electronics, Inc., www.seabird.com). When a STR is recovered, a new one is typically deployed in the same place. Time series data combining multiple deployments from a given site may also be available. Please contact CRED with any questions. For program information see the web site http://www.pifsc.noaa.gov/cred/oceanography.php

Summary

Summary

Description

XBT data were collected from the USCGC EVERGREEN in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the US Coast Guard (USCG) from 12 August 1978 to 01 September 1978. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Summary

Summary

Description

The Integrated Science Data Management (ISDM) office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship-of-Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program (WOCE UOT).

Summary

Summary

Description

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Summary

Description

This dataset contains an ESRI Grid with 6 meter cell size representing the bathymetry of selected portions of seafloor around Tourmaline Bank in Puerto Rico, derived from data collected in 2008. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in Puerto Rico from 2/25/08 to 3/8/08. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) in 2008. It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 19 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. An ASCII XYZ file was exported from the BASE surface and imported to ESRI ArcMap 9.2 using the Convert XYZ to Raster tool developed by CCMA for this purpose. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Summary

Summary

Summary

Description

Oceanographic station data were collected from the CHINCOTEAGUE within a 1-mile radius of Ocean Weather Station C (5245N 03530W) and in transit. Data were collected by the United States Coast Guard (USCG) from 31 January 1970 to 26 February 1970. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

Bathythermograph data were collected from the SEBAGO within a 1-mile radius of Ocean Weather Station E (3500N 04800W) and in transit. Data were collected by the United States Coast Guard from 01 September 1965 to 28 September 1965. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

Temperature profiles were collected from XBT casts from the DELTA NORTE from 21 March 1974 to 25 March 1974. Data were collected by Delta Steamship Co. as part of the Marine Resources Monitoring, Assessment and Prediction (MARMAP) project. Data were processed by NODC to the NODC standard Universal bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''''inflection points'''') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of 450 m or 760 m. Special instruments permitted measurements to 1830 m.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

XBT data were collected from the USCGC MUNRO in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the US Coast Guard (USCG) from 23 June 1978 to 20 August 1978. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.