Summary

Description

The Integrated Science Data Management(ISDM)office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship of Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program(WOCE UOT). The ISDM sends a copy of these data to the US NODC three times each week.

Summary

Description

NODC Accession 0107285 includes pump cast and biological data collected aboard the ALBATROSS IV, ENDEAVOR and OCEANUS during cruises AL9505, AL9506, AL9508, AL9605, AL9607, AL9701, AL9705, AL9707, AL9801, AL9806, AL9808, AL9901, AL9904, AL9906, EN259, EN261, EN262, EN263, EN264, EN265, EN266, EN267I, EN267II, EN276, EN278, EN282, EN319, EN320, EN322, OC275, OC298, OC300, OC301, OC302, OC303, OC317, OC319, OC322, OC336 and OC341 in the North Atlantic Ocean from 1995-01-12 to 1999-06-23. These data include SPECIES IDENTIFICATION - LIFE STAGE and TAXONOMIC CODE. The instruments used to collect these data include pump sampler. These data were collected by Maria C Casas and Ted Durbin of University of Rhode Island as part of GB. The Biological and Chemical Oceanography Data Management Office (BCO-DMO) submitted these data to NODC on 2013-04-26. The following is the text of the abstract provided by BCO-DMO: Zooplankton Meter3 Data - Pump data only The Zooplankton Meter3 Database for the Georges Bank GLOBEC project was orginally located in the laboratory of Ted Durbin at the Graduate School of Oceanography, University of Rhode Island. It was accessed via the U.S. GLOBEC Georges Bank data management system using SQLPlus network access to the data base management system at URI. The data were cached and are served from the local computer. A description of the original URI database is available online and includes the design and variable definitions. A version of this document is shown here. (http://globec.whoi.edu/globec-dir/data_doc/zoo_cubic_meter_URI.html) Note: Our program's Data Acknowledgement Policy (http://globec.whoi.edu/globec-dir/data-acknowledgement-policy.html) requires that any person making substantial use of a data set must communicate with the investigators who acquired the data prior to publication and anticipate that the data collectors will be co-authors of published results. The following documentation applies to the data found locally on the WHOI GLOBEC Data Server: The data is served as a hierarchy. The least changing variables are in higher order levels (e.g., cruise id, year, month, etc.), while variables that change the most are in the lower order levels (e.g., time of collection, net number, taxon collected, etc.) There are six levels within the database; variable names and descriptions are given in the metadata. Most column variable names and instrument names were taken from the U.S. GLOBEC Georges Bank data thesaurus; those that were not follow the GLOBEC data protocols. The taxonomic code variable (taxon_code) is from the National Oceanographic Data Center's Taxonomic List, version 8. Taxonomic information is built into these ten-digit codes as they reflect the systematic nomenclature. You may contact BCO-DMO for additional help.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

NCEI Accession 0130649 includes physical and profile data collected aboard the DAVIDSON during project OPR-K354-TC-05 in the Gulf of Mexico from 2005-01-19 to 2005-08-30. These data include SOUND VELOCITY. The instruments used to collect these data include CTD. These data were collected and submitted by the NOAA Office of Coast Survey in support of hydrographic multibeam surveys to meet NOAA charting requirements.

Summary

Description

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR)as the long-term archive for the International Global Argo Project (for additional information about Argo, see http://www.argo.ucsd.edu/ (last accessed November 2007)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity,as well as related conductivity and/or pressure measurements (if any), collected by Argo profiling floats.

Summary

Summary

Summary

Summary

Description

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR) as the long-term archive for the International Global Argo Project (for additional information about Argo, see http://www.argo.ucsd.edu/ (last accessed October 2009)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity, as well as related conductivity and/or pressure measurements (if any), collected by Argo profiling floats.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (AKA towboard surveys) are conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 9 towboard surveys (totaling 19.13 km in length) were conducted at Baker in Pacific Remote Island Areas from 2010-01-21 to 2010-04-24 as part of RAMP Cruise HA1001. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., crown of thorns sea stars, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish diver and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15 m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (greater than 50 cm total length) seen within 5 m either side and 10 m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including crown of thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15-second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5-second intervals. Latitude and longitude of each survey track is recorded at 15-second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the fish biomass observations.

Summary

Description

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Summary

Description

This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine land cover. This data set which utilized 1 full Quickbird multispectral scene and 1 full or partial 2009 WorldView2 multispectral scene, was analysed to detect C-CAP land cover features on Rose Atoll, American Samoa.

Summary

Description

This Light Detection and Ranging (LiDAR) LAS dataset is a topographic survey conducted for a coalition of GIS practitioners, including the Florida Division of Emergency Management (FDEM), Florida Water Management Districts, Florida Fish and Wildlife Conservation Commission, Florida Department of Environmental Protection, Army Corps of Engineers Jacksonville District, and other state and federal agencies. The goal for this project is to use the LiDAR data as new elevation inputs for updated SLOSH data grids. The ultimate result is the update of the Regional Hurricane Evacuation Studies (RHES) for the state. The State of Florida Division of Emergency Management LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. Data were collected for 185 square miles in the coastal (southern) part of Jefferson County, Florida from July 18 - 20, 2007. This is a classified lidar data set. The data are classified: 1 = Unclassified, 2 = Ground (Bare Earth), 7 = Noise and 9 = Water. The FDEM Baseline Specifications required a maximum post spacing of 4 feet, however, the PDS (Program and Data Solutions) team required a much higher point density of its subcontractors in order to increase the probability of penetrating dense foliage during the mandated summer acquisition; with nominal post spacing of 0.7 meters per flight line and 50% sidelap between flight lines, the average point density is 4 points per square meter.

Summary

Description

This dataset has 5-day Wind Stress data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean, http://www.pmel.noaa.gov/tao/rama/), and PIRATA (Atlantic Ocean, http://www.pmel.noaa.gov/pirata/) arrays of moored buoys which transmit oceanographic and meteorological data to shore in real-time via the Argos satellite system. These buoys are major components of the CLIVAR climate analysis project and the GOOS, GCOS, and GEOSS observing systems. 5-day data is an average of daily values collected during consecutive five day intervals. A minimum of 2 daily values are required to compute a 5-day average. This dataset contains realtime and delayed mode data (see the 'source' variable). For more information, see http://www.pmel.noaa.gov/tao/proj_over/proj_over.html .

Summary

Summary

Description

Temperature profile data were collected from surface sensors, bottle casts, and CTD casts from the NOAA Ship MILLER FREEMAN from 18 September 1986 to 14 May 1987. Data were collected by the University of Alaska - Fairbanks; Institute of Marine Science (UAK/IMS) as part of Outer Continental Shelf Environmental Assessment Program (OCSEAP). Data were processed by NODC to the NODC standard F022 High-Resolution CTD/STD Output Format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/f022.html. An analog file for this accession is available from NODC user services. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Summary

Description

Temperature profile and water depth data were collected using BT and XBT casts from the SEDCO / BP 471 in the Arabian Sea and Indian Ocean. Data were collected from 26 August 1987 to 16 October 1987 by Texas A & M University.

Summary

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary