Summary

Description

Meteorological, temperature, and salinity data were collected using CTD, BT, XBT casts, and other instruments from the NATSUSHIMA in the TOGA Area - Pacific Ocean. Data were collected from 23 January 1993 to 11 March 1993 by Japan Agency for Marine-Earth Science and Technology (JAMSTEC) with support from the Tropical Ocean Global Atmosphere (TOGA) project.

Summary

Description

The Integrated Science Data Management (ISDM) office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship-of-Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program (WOCE UOT).

Summary

Description

Oceanographic station data were collected from the BARATARIA and DALLAS within a 1-mile radius of Ocean Weather Station D (4400N 04100W), E (3500N 04800W), H (3800N 07100W), N (3000N 14000W), and in transit. Data were collected by the United States Coast Guard (USCG) from 24 February 1969 to 21 March 1969. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

Temperature profile data were collected using bathythermograph (BT/XBT) casts from PRESIDENT MCKINLEY in the Pacific Ocean from May 19, 1977 to May 29, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

Post-cruise download of raw data from shipboard computer(s) as furnished by the Woods Hole Oceanographic Institution Shipboard Scientific Support Group and archived by the Marine Biological Laboratory Woods Hole Oceanographic Institution Library for the R/V Atlantis - Cruise 011 Leg 12. These data are part of a collection of ocean observation data from Woods Hole Oceanographic Institution ships OCEANUS (call sign WXAQ; built 1975.00; IMO 7603617), KNORR (call sign KCEJ; built 1970.00; IMO 7738618), and the ATLANTIS (call sign KAQP; built 1997.03; IMO 9105798). The data sets are the downloads of the shipboard computers after an individual cruise. As such, they contain basic raw and processed physical and meteorological data from the cruise. A data set may include XBT, CTD, and XCTD profiles, underway thermosalinograph and atmospheric measurements, gravity and magnetic field measurements, current measurements from ADCP, and still photographs from the Alvin submersible (Atlantis cruises only). Other data types (ROV, nutrients measured from bottle samples, etc.) and photographs documenting the cruise may be included.

Summary

Description

Current meter components data were collected from FIXED PLATFORMS in the NE Pacific (limit-180) from 16 September 1994 to 10 May 1996. Data were collected by the Pacific Marine Environmental Laboratory (PMEL) as part of the VEMTS program. Data were processed by NODC to the NODC standard F015 Current Meter Components format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/f015.html. The F015 format contains time series measurements of ocean currents. These data are obtained from current meter moorings and represent the Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth and meter characteristics are reported for each station. The data record includes values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north. Data values may be subject to averaging or filtering and are typically reported at 10 - 15 minute time intervals. Water temperature, pressure and conductivity or salinity may also be reported. A text record is available for optional comments.

Summary

Description

Temperature profile data were collected using bathythermograph (BT/XBT) casts from PACIFIC ARROW in the Pacific Ocean from January 30, 1977 to February 6, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Summary

Description

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute USGS quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

Temperature profile data were collected using bathythermograph (BT/XBT) casts from PACIFIC ARROW in the Pacific Ocean from January 13, 1977 to January 23, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Summary

Description

Bottle data set collected on the R/V Rapuhia, a New Zealand ship which is run by New Zealand Oceanography Institute (NZOI). Data were collected from 21 February 1991 to 11 March 1991 as part of WHOI's moored current meter array experiment.

Summary

Description

The NOAA Atlantic Real-Time Ocean Forecast System (RTOFS) dataset comprises output fields from the daily operational RTOFS model runs conducted at the National Centers for Atmospheric Prediction. Each model run produces a series of gridded fields containing results of model computations for ocean temperature, salinity, currents, sea-surface height, and possibly other properties. The fields are encoded in the standard GRIdded Binary (GRIB) file format. NODC compiles a series of files into monthly accessions to facilitate archival storage and public access. Two different sets of output fields are included: 1) daily 3-dimensional fields reported on the model's native hybrid (isopycnal plus z-level) vertical coordinates (note: prior to June 6, 2007, these fields are interpolated to z-levels); and 2) hourly fields reported for the surface level only. Each daily model run produces a 24-hr hindcast as well as forecasts out to 120 hours.

Summary

Description

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

As a French contribution to the international TOGA-COARE (Tropical Ocean and Global Atmosphere - Coupled Ocean Atmosphere Response Experiment) programme, the COARE-POI cruise, on board the R/V Le Noroit, was carried out by the ORSTOM-SURTROPAC group in Noumea, New Caledonia, together with participation of U.K. and other scientists. From December 01, 1992 to March 02, 1993, 18 temperature, salinity, an current sections were made from 5 degree South - 5 Degree North along the 156 degree E meridian, and 2 sections in the Coral Sea from 20 degree South - 163 degree East to 6 South - 156 degree East. The following operations were made: 165 CTD casts with rosette samples every 0.5 degree / 1 degree latitude, continuous measurements of absolute current with an Acoustic Doppler Current Profiler, continuous measurement of temperature and salinity from the surface to 300 meter depth using a Seasoar continuous measurements of sea-surface temperature and salinity, standard meteorological observations at every 3 hours, deployments of 54 drifting buoys, fine-scale measurements at the air-sea interface, XBT, together with mooring recoveries and deployments.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Summary

Summary

Description

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20101007 to 20101105, belt transect surveys of coral population and diseases quantitative assessments were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) cruise HA1008 in Main Hawaiian Islands at biennial intervals by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, there were 6 surveys in total conducted at REA sites around Lanai. At the specific REA sites, coral biologists along with algal biologists and marine invertebrate zoologist entered the water and conducted a fine-scale (approximately 300 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species composition, abundance, percent cover, size distribution, diversity, and general health of corals, macro-invertebrates, and algae in shallow-water (less than 35 m) habitats. As a part of REA surveys, the coral belt surveys were focused on quantifying the diversity, abundance, density, and size-class distribution of the anthozoan and hydrozoan corals as well as the condition and health state of the coral reef populations. The surveys were conducted along two consecutively-placed, 25 m transect lines. The belt width was 1 m wide, 0.5 m on each side of the transect line. Within each 25 m transect, five 2.5 m segments were surveyed (beginning at points: 0, 5, 10, 15, and 20 meters), whereby in each segment, all coral colonies whose center fell within 0.5 m of either side of the transect line were identified to the lowest taxonomic level possible (genus or species) and two planar size metrics were collected: maximum diameter and diameter perpendicular to the maximum diameter. In addition, the extent of mortality, both recent and old, was estimated for each colony. Observers paid special attention to identifying as best as possible the extent of the former live colony. When a coral colony exhibited signs of disease or compromised health, additional information was recorded including type of affliction (bleaching, skeletal growth anomaly, white syndrome, tissue loss other than white syndrome, trematodiasis, necrosis, other, pigmentation responses, algal overgrowth, and predation), severity of the affliction (mild, moderate, marked, severe, acute), as well as photographic documentation and occasional tissue samples. Tissue samples were cataloged and fixed in buffered zinc-formalin solution for further histopathological analyses. Raw survey data included species presence and relative abundance, colony counts per taxon, size (width and length), mortality, predation, and health status. A surveyed area was ranging from 10 m^2 to 25 m^2 per site.