Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

MBT data were collected from the USS ENERGY in support of the Fleet Observations of Oceanographic Data (FLOOD) project. Data were collected by US Navy; Ships of Opportunity from 29 June 1966 to 01 March 1967. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

Bathythermograph data were collected from the HUMBOLDT within a 1-mile radius of Ocean Weather Station D (4400N 04100W) and in transit. Data were collected by the United States Coast Guard from 28 May 1966 to 24 June 1966. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

Bathythermograph data were collected from the HUMBOLDT within a 1-mile radius of Ocean Weather Station B (56305N 05100W) and in transit. Data were collected by the United States Coast Guard from 17 March 1966 to 01 April 1966. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Popis

EM300 and EM3002D multibeam Data were collected from 2 - 29 May 2008 aboard NOAA Ship Hi'ialakai at Necker Island, French Frigate Shoals, and Brooks Bank in the Northwestern Hawaiian Islands, during cruise hi0804. These multibeam data were collected using SAIC ISS-2000 software in the Generic Sensor Format and processed using SABER editing software. Surface sound velocity values were supplied by a Seabird SBE-45 MicroTSG and a SBE-38 remote temperature probe. Sound velocity corrections from a Seabird SBE 9/11 plus CTD and motion corrections from a POS-MV vertical reference were applied to the data in real time. Predicted tides were applied to the data in real time. Horizontal accuracy is 20 m (no differential GPS correctors applied), vertical accuracy is depth dependent (~1% of water depth), WGS84 datum. These data are not to be used for navigation. Depths mapped range from ~20-3000 m. Concurrent mapping at French Frigate Shoals was done by the R/V AHI in water depths ranging from ~10-350 m with the data set being ahi0804; (metadata for ahi0804 are submitted separately.)

Shrnutí

Shrnutí

Shrnutí

Popis

This Light Detection and Ranging (LiDAR) LAS dataset is a topographic survey conducted for a coalition of GIS practitioners, including the Florida Division of Emergency Management (FDEM), Florida Water Management Districts, Florida Fish and Wildlife Conservation Commission, Florida Department of Environmental Protection, Army Corps of Engineers Jacksonville District, and other state and federal agencies. The goal for this project is to use the LiDAR data as new elevation inputs for updated SLOSH data grids. The ultimate result is the update of the Regional Hurricane Evacuation Studies (RHES) for the state. The State of Florida Division of Emergency Management LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. This data was collected for part of Dixie County, Florida from 24 June - 17 August 2007. This is a classified lidar data set; bare-earth points (class 2), water returns (class 9), and unclassified data (class 1). The LiDAR data were flown at a density sufficient to support a maximum final post spacing of 4 feet for unobscured areas.

Shrnutí

Shrnutí

Popis

The Integrated Science Data Management (ISDM) office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship of Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program (WOCE UOT). The ISDM sends a copy of these data to the US NODC three times each week.

Shrnutí

Popis

The data represent predicted habitat suitability for several taxa of deep-sea corals. Predictions were modeled using a statistical machine-learning algorithm called maximum entropy (MaxEnt). NOAA National Centers for Coastal Ocean Science (NCCOS) combined databases of known deep-sea coral locations provided by the NOAA Deep-Sea Coral Research and Technology Program (DSCRTP) and other contributors with environmental and oceanographic data to generate the predictive models of deep-sea coral distribution. These models are used to produce regional maps of deep-sea coral habitat. In these regions, deep-sea coral occurs on the continental shelves and slopes, at ocean depths of approximately 50 to greater than 2,000 meters. Model predictions are organized into five hierarchical categories to be able to compare the data across coral taxa and across regions. The categories correspond to the predicted likelihood of suitable deep sea coral habitat occurring. Order: Anthoathecata, Suborder: Filifera, Family: Stylasteridae

Shrnutí

Shrnutí

Popis

XBT data were collected from the USCGC ACUSHNET in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the US Coast Guard from 21 September 1977 to 23 September 1977. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.