Shrnutí

Popis

This dataset contains a unified ESRI Grid with 10 meter cell size representing the bathymetry of selected portions of seafloor around La Parguera, Abrir La Sierra Bank, Tourmaline Bank, Bajo De Cico, and Isla De Mona in Puerto Rico and St. Croix, St. Thomas, and St. John in the US Virgin Islands, derived from data collected from 2004 to 2008. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 2/18/04 to 3/5/04 and 2/1/05 to 2/12/05, including La Parguera, P.R. from 3/21/06 to 4/2/06. Data was acquired with a pole-mounted Reson 8101 ER multibeam echosounder (240 kHz) in 2004 and 2005, and with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) in 2006. In Abrir La Sierra, Bajo de Cico, Tourmaline Bank, and Isla de Mona, P.R., the team, also in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired data from 4/14/07 to 4/24/07 and 2/25/08 to 3/8/08. Data with acquired with a hull-mounted Kongsberg Simrad EM 1002 (95 kHz) multibeam echosounder, as well as with a Reson 8124 (200 kHz) multibeam echosounder for shallow areas of Abrir La Sierra Bank. Data was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 19 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. For USVI and La Parguera, P.R. (2004-2006), an ASCII XYZ file was exported from the BASE surface and opened in ESRI ArcMap 9.x as an XY event. Then the ArcToolbox conversion tool 'Feature to Raster' was used to generate the final ESRI Grid. For Abrir La Sierra Bank, Bajo de Cico, Isla de Mona, and Tourmaine Bank (2007 and 2008), an ASCII XYZ file was exported from the BASE surface and opened in ESRI ArcMap 9.x using the XYZ to raster tool. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.