Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

These data represent data collected from the Shipboard Environmental (data) Acquisition System (SEAS), a program developed by National Oceanic and Atmospheric Administration (NOAA) to provide accurate meteorological and oceanographic data in real time from ships at sea through the use of satellite data transmission techniques. The system transmits data through either the Geostationary Operational Environmental Satellite (GOES) or the International Maritime Satellite Organization (INMARSAT C) satellites to NOAA for use in weather, climatological and ocean models. NOAA is actively participating in an international effort to increase the number of subsurface temperature observations in support of global oceanographic and climate studies. NOAA's Expendable Bathythermograph (XBT) program, SEAS, currently supports about 80 Voluntary Observing Ships (VOS). SEAS XBT data are archived by the National Oceanographic Data Center (NODC) on a weekly basis.

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Shrnutí

Popis

LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected at submeter resolution to provide nominal 1m spacing of collected points. Two returns were recorded for each pulse in addition to an intensity value. This data set is a raster file of z values with 153 columns and 61 rows. The data set was generated from a larger data set and includes all valid points within the requested geographic bounds.

Shrnutí

Popis

Oceanographic station data were collected from the BERING STRAIT within a 1-mile radius of Ocean Weather Station V (3400N 16400E) and in transit. Data were collected by the United States Coast Guard (USCG) from 17 November 1968 to 05 December 1968. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Shrnutí

Popis

XBT data were collected from the USCGC GALLATIN in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the US Coast Guard from 01 September 1974 to 27 September 1974. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Popis

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 15 April - 7 May 2009, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HI0903 in the Marianas Archipelago at biennial intervals by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 13 REA sites were surveyed at Asuncion Island in the Marianas Archipelago. At the specific REA sites, fish biologists along with coral biologists, algal biologists and marine invertebrate zoologist entered the water and conducted a fine-scale (~300 m2) and high degree of taxonomic resolution REA survey to assess and monitor species composition, abundance, percent cover, size distribution, diversity, and general health of fish, corals, macro-invertebrates, and algae in shallow-water (< 35 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density [# fish 100 m-2] and biomass density [kg 100 m-2]) of diurnally active reef fish assemblages. Three complementary noninvasive underwater survey methods were used, including belt-transect, stationary point count, and roving-diver surveys. For all methods, fish were identified at the species level, when possible, and assigned to a size bin ranging from 1 to 200 cm based on a visual estimate of total fish length. Belt-transect (BLT) surveys were used to quantify the entire diurnal fish community (all size classes). In belt-transect surveys, two fish biologists swam side-by-side along three consecutively-placed, 25m transect lines. The BLT team swam each transect two times. During the initial swim-out, each fish diver recorded all fish larger than 20 cm observed within a 4-m wide belt perpendicular to their respective side of the transect (200 m2 area per line, 100 m2 per diver). On the return swim, each fish diver recorded all fish less than 20 cm observed within a 2-m wide belt (100 m2 area per line, 50 m2 per diver). The survey of large fish took approximately 5 min to complete while the survey of smaller fish took about 10 min to complete. All reef-associated fish, including those in the water column (including planktivores), were counted. Any coastal pelagic species (e.g., clupeids [sardines], belonids [beakfish], antherinids [silversides]) seen near the surface were not recorded. The stationary point count (SPC) method were used to quantify larger, more mobile reef fish species that can be missed on belt-transect surveys. In stationary point count survey, a fish biologist swam approximately 15 m away from a transect line concurrently being surveyed by the other two BLT fish biologists. The SPC biologist then recorded all fish greater than 25 cm in length that passed within a visually estimated 20-m diameter cylinder centered on the diver's fixed position (10-m radius, total area = 314 m2). The survey time for each stationary point count survey was 5 min and a total of four stationary point count surveys were conducted at each REA site. Roving-diver surveys were followed belt-transect and stationary point count surveys. As diver bottom time permitted, the fish assessment team conducted random swim surveys throughout the REA site area, recording, to the species level or the lowest recognizable taxon, the presence of reef fish not encountered during previous methods.

Shrnutí

Shrnutí

Shrnutí

Popis

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (AKA towboard surveys) are conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 10 towboard surveys (totaling 22.05 km in length) were conducted at Agrihan in Marianas from 20110407 to 20110509 as part of RAMP Cruise HA1101. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., crown of thorns sea stars, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish diver and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15 m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (greater than 50 cm total length) seen within 5 m either side and 10 m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including crown of thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15-second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5-second intervals. Latitude and longitude of each survey track is recorded at 15-second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the fish biomass observations.

Shrnutí

Popis

This metadata record references seawater temperature data collected at various sites and depths in the vicinity of PIMS research station on Lee Stocking Island, Exuma, Bahamas. Perry Institute for Marine Science (PIMS) Environmental Monitoring Program maintains a database of environmental data sets collected from the Bahamas and other sites in the Caribbean region. Parameters vary from set to set, and include surface meteorological data and subsurface oceanographic data.

Shrnutí

Shrnutí