Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

This image represents a LiDAR (Light Detection & Ranging) bathymetric mosaic (mean 4 meter gridded) collected along the coastline of southwestern Puerto Rico. The Tenix LADS Corporation (TLI) acquired bathymetric LIDAR for NOAA from 4/07/2006 to 5/15/2006. Data was acquired with a LADS (Laser Airborne Depth Sounder) Mk II Airborne System from altitudes between 1,200 and 2,200ft at ground speeds between 140 and 175 knots. The 900 Hertz Nd: YAG (neodymium-doped yttrium aluminum garnet) laser (1064 nm) acquired 4x4 meter spot spacing and 200% seabed coverage. In total, 265 square nautical miles of LiDAR were collected between -50 m (topographic) and up to 70 m (depth), requiring a total of 102 flight hours (134 hours, including flight time to and from San Juan airport). Environmental factors such as wind strength and direction, cloud cover, and water clarity influenced the area of data acquisition on a daily basis. The data was processed using the LADS Mk II Ground System and data visualization, quality control and final products were created using CARIS HIPS and SIPS 6.1 and CARIS BASE Editor 2.1 The project was conducted to meet the IHO (International Hydrograph Organization)Order 1 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

Bathythermograph data were collected from the CHINCOTEAGUE within a 1-mile radius of Ocean Weather Station B (56305N 05100W) and in transit. Data were collected by the United States Coast Guard from 03 April 1962 to 04 May 1962. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Popis

The goals of the cruise were to collect a variety of data to assess the status of mesophotic corals in the Auau Channel, off the west coast of Maui. Camera surveys of corals and fish were conducted by a live feed video camera attached to a Towed Optical Assessment Device (TOAD). Two instrument arrays were deployed to monitor environmental variables (temperature, salinity, currents) for a period of one year. In addition, two smaller arrays were deployed to monitor temperature and occurrences of transient large fish that have been tagged previously. CTD casts were conducted at predetermined stations off a small boat, and light measurement profiles were taken at midday over a period of 4 days. Biological backscatter were recorded using an EK60 echosounder system operating at 38, 70, & 120 kHz along predetermined transects.

Shrnutí

Popis

Bathythermograph data were collected from the CASCO within a 1-mile radius of Ocean Weather Station D (4400N 04100W) and in transit. Data were collected by the United States Coast Guard from 12 February 1962 to 15 March 1962. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Shrnutí

Popis

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository(GADR as the long-term archive for the International Global Argo Project (for additional information about Argo,see http://www.argo.ucsd.edu/(last accessed Jul 2010)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity, as well as related conductivity and/ or pressure measurements(if any),collected

Shrnutí

Popis

XBT data were collected from the NOAA Ship DISCOVERER in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the US DOC; NOAA; National Ocean Service - Seattle from 27 July 1977 to 20 November 1977. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Shrnutí

Popis

The imagery posted on this site is of the surrounding regionsafter Hurricane Gustav made landfall. The aerial photography missions wereconducted by the NOAA Remote Sensing Division. The images were acquiredfrom a nominal altitude of 7,500 feet, using an Emerge/Applanix DigitalSensor System (DSS).

Shrnutí

Popis

XBT data were collected from the USCGC CAMPBELL in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the US Coast Guard from 24 February 1978 to 04 March 1978. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Popis

Temperature, salinity, nutrients, and other data were collected from bottle and CTD casts from the POSEYDON and other platforms. Data were collected from a world-wide distribution from from 27 February 1958 to 28 February 1991. Data include temperature, salinity, and pH profiles. Nutrients data include concentration profiles of phosphate, total phosphate, silicate, nitrate, nitrite, and ammonia. Additional funding for digitizing historic data were provided by the Global Ocean Data Archaeology and Rescue (GODAR) project.

Shrnutí

Popis

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 17 February - 23 March 2010, marine invertebrate quantitative assessments were conducted, as part of Rapid Ecological Assessments (REA), during the Reef Assessment and Monitoring Program (RAMP) Cruise HI1001 in the American Samoa. Such cruises are conducted at biennial intervals by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). At specific reef sites, marine invertebrate zoologists along with coral and algal biologists entered the water and conducted a fine-scale (~100 m2) and high degree of taxonomic resolution benthic REA survey for coral, algae, and key invertebrate species. Invertebrate surveys were focused on quantifying key non-coral invertebrate species common to the reef habitats, and were conducted using a belt-transect survey method. In belt-transect surveys, quantitative counts of key invertebrates were recorded along two consecutively-placed 25m long and 2m wide belt transects (total area = 100 m2). For any species that cannot be identified in the field, a photograph and a representative specimen, if possible, is collected for later identification. Based on data from previous REA surveys, a group of target invertebrate species was chosen for quantitative counts at 3 REA sites at Ofu and Olosega Islands in the American Samoa. The species in the list were chosen because they have been shown to be common components of the reef habitats and they are species that are generally visible (i.e.; non-cryptic) and easily enumerated during the course of a single 50-60 minute SCUBA survey.

Shrnutí

Shrnutí

Popis

XBT data were collected from the NOAA ship Researcher in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the US DOC; NOAA; National Ocean Service - Miami from 06 June 1974 to 16 June 1974. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Popis

XBT data were collected from the USCGC MIDGETT in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the US Coast Guard (USCG) from 07 February 1978 to 26 February 1978. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Shrnutí

Shrnutí

Popis

XBT data were collected from the NOAA Ship SURVEYOR in support of the Integrated Global Ocean Services System (IGOSS) project. Data were collected by the National Ocean Service (NOS) from 18 October 1977 to 21 November 1977. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Shrnutí

Shrnutí

Shrnutí

Popis

The NOAA Atlantic Real-Time Ocean Forecast System (RTOFS) dataset comprises output fields from the daily operational RTOFS model runs conducted at the National Centers for Atmospheric Prediction. Each model run produces a series of gridded fields containing results of model computations for ocean temperature, salinity, currents, sea-surface height, and possibly other properties. The fields are encoded in the standard GRIdded Binary (GRIB) file format. NODC compiles a series of files into monthly accessions to facilitate archival storage and public access. Two different sets of output fields are included: 1) daily 3-dimensional fields reported on the model's native hybrid (isopycnal plus z-level) vertical coordinates (note: prior to June 6, 2007, these fields are interpolated to z-levels); and 2) hourly fields reported for the surface level only. Each daily model run produces a 24-hr hindcast as well as forecasts out to 120 hours.