Summary

Description

This shapefile includes polygons and regions that describe U.S. Geological Survey defined petroleum resource Assessment Units of northern Afghanistan. Each assessment unit is defined as a mapable volume of rock within a total petroleum system that encompasses fields (discovered and undiscovered) that share similar geologic traits and socio-economic factors. The fields inside an assessment are a sufficiently homogenous population that a single methodology of resource assessment is applicable. Assessment units are described by U.S. Geological Survey research scientists on the basis of available geologic knowledge, exploration and production histories, and extensive literature searches. Assessment units are identified with a numeric code derived from the numeric code of the World Geologic Provinces defined by the U.S. Geological Survey World Petroleum Assessment 2000.

Summary

Description

Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of October 2001 when the cell maps were created in 2002.

Summary

Description

A geographic information system focusing on Tertiary strata and Cretaceous-Tertiary coalbed gas was developed for the U.S. Geological Survey's (USGS) 2007 assessment of undiscovered, technically recoverable oil and natural gas resources of the Gulf Coast Region. The USGS Energy Resources Science Center has developed map and metadata services to deliver the 2007 assessment results GIS data and services online. The Gulf Coast assessment is based on geologic elements of a total petroleum system (TPS) as described in Dubiel and others (2007) and Warwick and others (2007). The estimates of undiscovered conventional oil and gas resources are within 33 assessment units (AUs) and the estimates of continuous coalbed gas resources are within 4 AUs. The hydrocarbon assessment units include the assessment results as attributes within the AU polygon feature class (in geodatabase and shapefile format). Quarter-mile cells of the land surface that include single or multiple wells were created by the USGS to illustrate the degree of exploration and the type and distribution of production for each assessment unit. Other data that are available in the map documents and services include the TPS and USGS province boundaries, as well as Claiborne Group structure and isopach maps.

Summary

Description

This ArcView shapefile contains a polygon representation of the northern part (Jim Bridger area) of the Point of Rocks-Black Butte coalfield in the Greater Green River Basin, Wyoming. This boundary is a part of the National Coal Resource Assessment of the Northern Rocky Mountain and Great Plains Fort Union Coal Resources Assessment Area. This shapefile can be shown in relation to other relevant themes of this area.

Summary

Description

The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The Michigan Basin Province is located in all of Michigan, except for a small portion of the Upper Penninsula, eastern Wisconsin, northeastern Illinois, northern Indiana, and northwestern Ohio. The main population centers within the study area are Detroit, Grand Rapids, Lansing and Flint, Michigan; Milwakee, Wisconsin; Chicago, Illinois; Fort Wayne, Indiana; and Toledo, Ohio. Numerous Interstate highways traverse the province from north to south and east to west. The province boundary was drawn to include the geologic structures generally considered to be in or bounding the Michigan Basin.

Summary

Description

Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells were then coded to indicate whether the wells included within the cell are predominantly oil-producing, gas-producing, are both oil- and gas-producing, or are dry or the type of production is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data were current as of 2004 when the cell maps were created in 2007.

Summary

Description

This ArcView shapefile contains a polygon representation of numerous themes associated with the Johnson-107 coal zone in the South Carbon coalfield, Carbon Basin, Wyoming. The purpose of this shapefile is to allow the user to perform multiple theme queries. This theme was created specifically for the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains Region.

Summary

Description

This dataset (located by latitude and longitude) is a subset of the geochemical dataset found in Chap. E, Appendix 2, Disc 1, and used in this study of the Lower Kittanning coal bed. That dataset is a compilation of data from the U.S. Geological Survey's (USGS) National Coal Resources Data System (NCRDS) USCHEM (U.S. geoCHEMical), The Pennsylvania State University (PSU), the West Virginia Economic and Geological Survey (WVGES), and the Ohio Division of Geological Survey (OHGS) coal quality databases as well as published U.S. Bureau of Mines (USBM) data. The metadata file for the complete dataset is found in Chap. E, Appendix 3, Disc 1 (please see it for more detailed information on this geochemical dataset). This subset of the geochemical data for the Lower Kittanning coal bed includes ash yield, sulfur content, SO2 value, gross calorific value, arsenic content and mercury content for these records, as well as the ranking of these values, which is described later under the attributes in this metadata file. Analytical techniques are described in the references in Chap. E, Appendix 4, Disc 1. The analytical data are stored as text fields because many of the parameters contain letter qualifiers appearing after the numerical data values. The following is a list of the possible qualifier values: L - less than, G - greater than, N - not detected, or H - interference that cannot be easily resolved. Not all of these codes may be in this database.

Summary

Description

This is a shapefile and the final unioned polygon coverage used to calculate coal resources of the lower Blackhawk Formation in the southern Wasatch coal assessment area. Polygons that make up the final unioned polygons include counties, 7.5' quadrangles, townships, surface and coal ownership, reliability, overburden categories, and net coal thickness categories. The final unioned coverage was clipped by the resource boundary polygon, which is described in the metadata file for the shapefile WS_BND.

Summary

Description

This map shows the structural configuration of the top of the Travis Peak or Hosston Formations in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the Kelly bushing elevation or the ground surface elevation) and the reported depth of the Travis Peak or Hosston. This resulted in 18,941 wells for which locations were available. After deleting the wells with obvious data problems, a total of 18,933 wells were used for the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Travis Peak or Hosston Formations are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

Summary

Description

The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary. The Assessment Unit boundaries were defined in the period from March to May, 2000.

Summary

Description

The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles. The data are provided as both lines and polygons (umtoplg.shp and umtoppg.shp), and the public wells that penetrate the top of the Upper Miocene (UM) sequence are provided in a point shapefile (umtopptg.shp). These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other scientific organizations. In cases where company proprietary data were used to produce various derivatives such as contour surfaces, the source is cited but the data are not displayed.

Summary

Description

The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, hydrocarbon plays or assessment units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The province boundaries were drawn on the county lines that most closely followed the natural geologic boundaries.

Summary

Description

The USGS Central Region Energy Team assesses oil and gas resources of the United States. The onshore and State water areas of the United States comprise 71 provinces. Within these provinces, Total Petroleum Systems are defined and Assessment Units are defined and assessed. Each of these provinces is defined geologically, and most province boundaries are defined by major geologic changes. The San Juan Basin Province is located in South Western Colorado and North Western New Mexico, encompassing all or parts of Montezuma, La Plata, and Archuletta Counties in Colorado and all or parts of San Juan, Rio Arriba, Sandoval, Mckinley, Bernalillo, and Cibola Counties in New Mexico. The main population centers within the study area are Durango Colo.; and Farmington, New Mexico. The San Juan River and Animas River and their tributaries drain the area. The province boundary was drawn to include the geologic structures generally considered to be in or bounding the San Juan Basin

Summary

Description

The drilling history documents oil and gas wells in the Middle Miocene sequence as a whole and in 10-year intervals. The wells included in this interval are determined by completion date and by comparing the depth of the wells to structure contours of the Middle Miocene sequence. The data are provided in a single file (mm_prod.shp) as well as eight 10-year interval files covering 1920 through 1999. These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other scientific organizations. In cases where company proprietary data were used to produce various derivatives such as contour surfaces, the source is cited but the data are not displayed.

Summary

Description

This map service was created to assemble oil and gas well information for a comprehensive inventory of energy data pertinent to the Wyoming Landscape Conservation Initiative decision-making process. These data are available as online resources for scientists, resource managers engaged in the Initiative, and other researchers. The GIS data and map documents created for this study are available for interactive analysis and/or download at the Energy Geoscience Center website.

Summary

Description

This isopach map shows the thickness of the interval from the top of the Travis Peak or Hosston Formations to the top of the Cotton Valley Group. The map was produced by first subtracting the values of the top of the Travis Peak or Hosston from those of the top of the Cotton Valley Group. This resulted in a data set of 8,585 values for which locations were available. After deleting the wells with obvious data problems, a total of 8414 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate this interval are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

Summary

Description

Faults in Danforth Hills study area.

Summary

Description

The structure contours were created using biostratigraphic data in the Paleo-Data, Inc., Tenroc Regional Geologic Database. The depths of the microfossil locations were associated with the wells data provided by the Louisiana Department of Natural Resources. Because of the proprietary nature of the Tenroc database, no actual data can be shown and only those data points contained in the Louisiana State wells database are included in the control points layer. Contouring was accomplished in Dynamic Graphics, Inc., EarthVision modeling software (v.5) using minimum tension gridding. Three custom programs were used to convert contour lines generated from grids in EarthVision to Arc/Info coverages and then to shapefiles. The data are provided as both lines and polygons (lm2toplg.shp and lm2toppg.shp), and the public wells that penetrate the top of the Lower Miocene 2 (LM2) sequence are provided in a point shapefile (lm2topptg.shp). These datasets contain basic data and interpretations developed and compiled by the U.S. Geological Survey's Framework Studies and Assessment of the Gulf Coast Project. Other major sources of data include publicly available information from state agencies as well as publications of the U.S. Geological Survey and other scientific organizations. In cases where company proprietary data were used to produce various derivatives such as contour surfaces, the source is cited but the data are not displayed.

Summary

Description

The Assessment Unit is the fundamental unit used in the National Assessment Project for the assessment of undiscovered oil and gas resources. The Assessment Unit is defined within the context of the higher-level Total Petroleum System. The Assessment Unit is shown here as a geographic boundary interpreted, defined, and mapped by the geologist responsible for the province and incorporates a set of known or postulated oil and (or) gas accumulations sharing similar geologic, geographic, and temporal properties within the Total Petroleum System, such as source rock, timing, migration pathways, trapping mechanism, and hydrocarbon type. The Assessment Unit boundary is defined geologically as the limits of the geologic elements that define the Assessment Unit, such as limits of reservoir rock, geologic structures, source rock, and seal lithologies. The only exceptions to this are Assessment Units that border the Federal-State water boundary. In these cases, the Federal-State water boundary forms part of the Assessment Unit boundary.

Summary

Description

The geology data set for this map includes arcs, polygons, and labels that outline and describe the general geologic age and rock type for South Asia. The geologic provinces data set includes arcs, polygons, and labels of geologic and petroleum provinces interpreted and designated by Ben E. Law and Craig J. Wandrey from a number of literature and map resources to assist in the assessment of oil and gas resources for the U.S.G.S. World Energy Project. The oil and gas field centerpoints data set is a point coverage that marks the approximate centerpoints of oil and gas fields in South Asia. Political boundaries are provided to show the general location of country and/or other reference 'political' boundaries.

Summary

Description

This coverage includes polygons and polygon labels that hold names of physiographic elements from the original Physiograpic map of Bangladesh.

Summary

Description

This is a shapefile and coverage of points used in the assessment of coal in the lower Blackhawk Formation, southern Wasatch Plateau, Utah.

Summary

Description

The Total Petroleum System is used in the World Petroleum Resource Project and incorporates the Assessment Unit, which is the fundamental geologic unit used for the assessment of undiscovered oil and gas resources. The Total Petroleum System is shown here as a geographic boundary defined and mapped by the geologist responsible for the province and incorporates not only the set of known or postulated oil and (or) gas accumulations, but also the geologic interpretation of the essential elements and processes within the petroleum system that relate to source, generation, migration, accumulation, and trapping of the discovered and undiscovered petroleum resource(s).

Summary

Description

This ArcView shapefile contains a polygon representing the extent of the Bull Mountain coal basin boundary. This theme was created specifically for the National Coal Resources Assessment in the Northern Rocky Mountains and Great Plains Region.