Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Summary

Description

This dataset contains a 6m ESRI Grid representing the rugosity of a selected portion of seafloor around Isla de Mona in Puerto Rico, derived from data collected in 2008. Rugosity is defined as the ratio of surface area to planar area and is used as a measure of benthic terrain complexity or "roughness". Rugosity values near 1 represent flat, smooth terrain, while higher values reflect increasing rugosity or terrain roughness. For rugosity grid interpretation, it is recommended that the grid be reclassified according to standard deviation divisions. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in Puerto Rico from 2/25/08 to 3/8/08. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) in 2008. It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 19 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle. An ASCII XYZ file was exported from the BASE surface and imported to ESRI ArcMap 9.2 using the Convert XYZ to Raster tool developed by CCMA for this purpose. The Benthic Terrain Modeller (BTM) tool, a collection of ArcGIS terrain visualization tools developed by the Oregon State University (OSU) Department of Geosciences and the National Oceanic and Atmospheric Administration (NOAA) Coastal Services Center, was used to calculate the rugosity of that bathymetric grid. More information on the specific algorithms used can be found in the BTM's documentation. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Summary

Description

This shapefile denotes the location of underwater photos and/or video that were collected by NOAA scientists using a Spectrum Phantom S2 ROV (remotely operated vehicle). Photos and/or video were collected between 03/26/2009 and 04/02/2009 along 18 transects south and east of Isla de Vieques, Puerto Rico in the U.S. Caribbean. These photos and videos will be manually classified into different habitat classes, and integrated with the abiotic data collected by the acoustic sonar (sound navigation and ranging) systems to develop a benthic habitat map for the U.S. Caribbean. Habitat maps describe the location of habitat features (in relation to the shoreline), their physical composition and the types of organisms that colonize them. Fundamentally, habitat maps provide critical information about the extent, health and composition of marine resources, which is vital for communicating information about the distribution and abundance of species to resource managers, scientists and the public. Habitat maps also support an increasing number of landscape ecology studies, as well as the process of marine spatial planning, including the design and evaluation of marine protected areas (MPAs).

Summary

Summary

Description

NCEI Accession 0130639 includes physical and profile data collected aboard the NAVIGATION RESPONSE TEAM 2 during project OPR-H320-NRT2-06 in the North Atlantic Ocean from 2006-11-08 to 2007-04-18. These data include SOUND VELOCITY. These data were collected and submitted by the NOAA Office of Coast Survey in support of hydrographic multibeam surveys to meet NOAA charting requirements.

Summary

Description

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Summary

Description

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute USGS quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

Summary

Description

Post-cruise download of raw data from shipboard computer(s) as furnished by the Woods Hole Oceanographic Institution Shipboard Scientific Support Group and archived by the Marine Biological Laboratory Woods Hole Oceanographic Institution Library for the R/V Oceanus - Cruise 365 Leg 01. These data are part of a collection of ocean observation data from Woods Hole Oceanographic Institution ships OCEANUS (call sign WXAQ; built 1975.00; IMO 7603617), KNORR (call sign KCEJ; built 1970.00; IMO 7738618), and the ATLANTIS (call sign KAQP; built 1997.03; IMO 9105798). The data sets are the downloads of the shipboard computers after an individual cruise. As such, they contain basic raw and processed physical and meteorological data from the cruise. A data set may include XBT, CTD, and XCTD profiles, underway thermosalinograph and atmospheric measurements, gravity and magnetic field measurements, current measurements from ADCP, and still photographs from the Alvin submersible (Atlantis cruises only). Other data types (ROV, nutrients measured from bottle samples, etc.) and photographs documenting the cruise may be included.

Summary

Description

Ocean color and transparency data received from Royal Netherlands Institute for Sea Research collected in the years 1889-99, 2001, 2002 and 2013.

Summary

Description

NCEI Accession 0130631 includes physical and profile data collected aboard the THOMAS JEFFERSON during project OPR-E350-TJ-11 in the North Atlantic Ocean from 2010-10-26 to 2012-04-13. These data include SOUND VELOCITY. These data were collected and submitted by the NOAA Office of Coast Survey in support of hydrographic multibeam surveys to meet NOAA charting requirements.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

NCEI Accession 0130635 includes physical and profile data collected aboard the NAVIGATION RESPONSE TEAM 2 during project OPR-G433-NRT2-01 from 2002-01-23 to 2002-10-27. These data include SOUND VELOCITY. These data were collected and submitted by the NOAA Office of Coast Survey in support of hydrographic multibeam surveys to meet NOAA charting requirements.

Summary

Description

NCEI Accession 0130630 includes physical and profile data collected aboard the BAY HYDROGRAPHER during project OPR-E349-BH-08 in the North Atlantic Ocean from 2008-03-24 to 2010-05-05. These data include SOUND VELOCITY. These data were collected and submitted by the NOAA Office of Coast Survey in support of hydrographic multibeam surveys to meet NOAA charting requirements.

Summary

Description

Oceanographic station data were collected from the MINNETONKA within a 1-mile radius of Ocean Weather Station N (3000N 14000W) and in transit. Data were collected by the United States Coast Guard (USCG) from 23 April 1974 to 17 May 1974. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Data Buoy Center (NDBC) established the Coastal-Marine Automated Network (C-MAN) for the National Weather Service in the early 1980's. NDBC has installed approximately 50 C-MAN stations on lighthouses, at capes and beaches, on near shore islands, and on offshore platforms. NDBC has deployed over 100 moored (a.k.a., weather) buoys in coastal and offshore waters from the western Atlantic to the Pacific Ocean around Hawaii, and from the Bering Sea to the South Pacific. C-MAN and moored buoy data typically include barometric pressure, wind direction, speed and gust, and air temperature; however, some C-MAN stations are equipped to also measure seawater temperature, water level, waves, and relative humidity. Moored buoys measure wave energy spectra from which NDBC derives significant wave height, dominant wave period, and average wave period. In addition, many moored buoys measure the direction of wave propagation. In collaboration, NDBC and the National Oceanographic Data Center (NODC) are archiving these data from C-MAN and moored buoys. This NODC Accession is part of the collaboration and it contains netCDF (version 4) files with the data collected during June 2011.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.