Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.

Summary

Description

The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The Floodplain Mapping/Redelineation flood risk boundaries are derived from the engineering information Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

Summary

Description

Digital 4 band ortho imagery covering 41 counties in southwest Iowa was flown Spring 2009. Imagery was collected with Lecia ADS80-SH82 and ADS40-SH51 digital cameras at a flight height of 20'000 agl. 4Band imagery in tif format was rectified and cut into a tiled grid for the Iowa DNR. County mosaics were created in MrSid format using 3 bands.

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix N)

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the Nebraska State Plane Feet projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:6,000, 1:12,000, and 1:24,000.

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.

Summary

Description

Terrain data, as defined in FEMA Guidelines and Specifications, Appendix N: Data Capture Standards, describes the digital topographic data that was used to create the elevation data representing the terrain environment of a watershed and/or floodplain. Terrain data requirements allow for flexibility in the types of information provided as sources used to produce final terrain deliverables. Once this type of data is provided, FEMA will be able to account for the origins of the flood study elevation data. (Source: FEMA Guidelines and Specifications, Appendix N, Section N.1.2). NAD83 State Plane Missouri West Zone FIPS 2403 is the projection and coordinate system for this project.

Summary

Description

Survey data can be found in the Terrain DCS submittal to FEMA, located on FEMA server J:\FEMA\R07\MISSOURI_29\ST_LOUIS_29189\ST_LOUIS_189C\MICS_30063\SubmissionUpload\Terrain\2124335

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix N)

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix N)

Summary

Description

This is collection level metadata for LAS and ASCII data files from the statewide Iowa Lidar Project. The Iowa Light Detection and Ranging (LiDAR) Project collects location and elevation (X, Y, Z) data to a set standard for the entire state of Iowa. LIDAR is defined as an airborne laser system, flown aboard rotary or fixed-wing aircraft, that is used to acquire x, y, and z coordinates of terrain and terrain features that are both manmade and naturally occurring. LIDAR systems consist of a light-emitting scanning laser, an airborne Global Positioning System (GPS) with attendant GPS base station(s), and an Inertial Measuring Unit (IMU). The laser scanning system measures ranges from the scanning laser to terrain surfaces by measuring the time it takes for the emitted light (LIDAR return) to reach the earth's surface and reflect back to the onboard LIDAR detector. The airborne GPS system ascertains the in-flight three-dimensional position of the sensor, and the IMU delivers precise information about the attitude of the sensor. The LIDAR system incorporates data from these three subsystems to produce a large cloud of points on the land surface whose X, Y, and Z coordinates are known within the specified accuracy. This collection consists of ASCII files of bare earth elevations and intensity (x,y,z,i) and, LAS (version 1.0 lidar data interchange standard) binary files that include all 1st and last returns, intensity and bare earth classification.

Summary

Description

Hydrology data include spatial datasets and data tables necessary for documenting the hydrologic procedures for estimating flood discharges for a flood insurance study, which includes the hydrologic data expected by FEMA for new riverine studies.

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix N)

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix N)

Summary

Description

Hydrology data include spatial datasets and data tables necessary for documenting the hydrologic procedures for estimating flood discharges for a flood insurance study, which includes the hydrologic data expected by FEMA for new riverline studies. (Source: FEMA Guidelines and Specifications, Appendix N)

Summary

Description

FEMA Framework Basemap datasets comprise six of the seven FGDC themes of geospatial data that are used by most GIS applications (Note: the seventh framework theme, orthographic imagery, is packaged in a separate NFIP Metadata Profile): cadastral, geodetic control, governmental unit, transportation, general structures, hydrography (water areas & lines. These data include an encoding of the geographic extent of the features and a minimal number of attributes needed to identify and describe the features. (Source: Circular A16, p. 13)

Summary

Description

Hydrology data include spatial datasets and data tables necessary for documenting the hydrologic procedures for estimating flood discharges for a flood insurance study, which includes the hydrologic data expected by FEMA for new riverline studies. (Source: FEMA Guidelines and Specifications, Appendix N)

Summary

Description

The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The Floodplain Mapping/Redelineation flood risk boundaries are derived from the engineering information Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).

Summary

Description

Terrain data, as defined in FEMA Guidelines and Specifications, Appendix N: Data Capture Standards, describes the digital topographic data that was used to create the elevation data representing the terrain environment of a watershed and/or floodplain. Terrain data requirements allow for flexibility in the types of information provided as sources used to produce final terrain deliverables. Once this type of data is provided, FEMA will be able to account for the origins of the flood study elevation data. (Source: FEMA Guidelines and Specifications, Appendix N, Section N.1.2).

Summary

Description

Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to a much greater extent than was possible in the past. The minimum requirement for hydraulics data includes input and output files for all hydraulic models and spatial datasets that are needed to implement the models. (Source: FEMA Guidelines and Specs, Appendix M)

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk Information And supporting data used to develop the risk data. The primary risk; classificatons used are the 1-percent-annual-chance flood event, the 0.2-percent- annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.

Summary

Description

FEMA Framework Basemap datasets comprise six of the seven FGDC themes of geospatial data that are used by most GIS applications (Note: the seventh framework theme, orthographic imagery, is packaged in a separate NFIP Metadata Profile): cadastral, geodetic control, governmental unit, transportation, general structures, hydrography (water areas and lines. These data include an encoding of the geographic extent of the features and a minimal number of attributes needed to identify and describe the features. (Source: Circular A16, p. 13)

Summary

Description

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk Information And supporting data used to develop the risk data. The primary risk; classificatons used are the 1-percent-annual-chance flood event, the 0.2-percent- annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.