Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

This project is a cooperative effort among the National Ocean Service, National Centers for Coastal Ocean Science, Center for Coastal Monitoring and Assessment; the University of Hawaii; and Analytical Laboratories of Hawaii, LLC. IKONOS imagery was purchased to support the Pacific Islands Geographic Information System (GIS) project and the National Ocean Service's (NOS) coral mapping activities. One-meter panchromatic and four-meter multi-spectral data were purchased for each study area. The enhanced spectral resolution of multispectral imagery and control of bandwidths of multispectral data yield an advantage over color aerial photography particularly when coral health and time series analysis of coral reef community structure are of interest. The IKONOS imagery was processed to minimize atmospheric and water column effects. Photointerpreters can accurately and reliably delineate boundaries of features in the imagery as they appear on the computer monitor using a software interface such as the Habitat Digitizer.

Summary

Description

Oceanographic station data were collected from the CAMPBELL within a 1-mile radius of Ocean Weather Station B (5630N 05100W) and in transit. Data were collected by the United States Coast Guard (USCG) from 26 August 1971 to 17 September 1971. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Description

The HOT program makes repeated observations of the physics, biology and chemistry at a site approximately 100 km north of Oahu, Hawaii. Two stations are visited about once a month: Kahe Point (Station 1: 21.34N, 158.27W) and Station ALOHA (Station 2: 22.75N, 158W). Various other stations are made intermittently in support of similar research objectives or mooring deployments. Samples of water column chemical analyses were collected mostly in the upper 1000m using Niskin bottles mounted on a rosette. The strategy was to sample at density horizons within the main thermocline at pressure horizons above and below this region (i.e., 2000 dbar). Care was applied to ensure the highest possible accuracy and precision. This NODC accession contains Niskin Bottle data for HOT cruises 249-258 during 2013. CTD and thermosalinograph data from the same cruises are available in separate NODC accessions. Historic data for HOT have also been archived at NODC.

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Summary

Description

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Summary

Summary

Description

Physical, current, meteorological, and other data were collected from XBT casts, buoys, and other instruments from a World-Wide distribution. Data were collected from 26 July 2003 to 22 September 2003. Data were submitted by the Marine Environmental Data Service (MEDS) in support of the Array for Real-time Geostrophic Oceanography (Argo), the Gulf of Mexico NOAA/NMFS Ship of Opportunity (SOOP), and the Global Temperature-Salinity Pilot Project (GTSPP). Physical parameters include profiles of temperature and salinity. Current parameters include current direction and speed. Meteorological parameters include dry bulb temperature, wind speed, wind direction, relative humidity, and air pressure.

Summary

Summary

Summary

Summary

Summary

Description

XBT data were collected from the USCGC ACUSHNET in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the US Coast Guard on 20 January 1976. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Standard XBTs can obtain profiles at depths of about 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Cruise information, position, date, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Unlike the MBT data file, in which temperature values are recorded at uniform 5m intervals, the XBT Data File contains temperature values at non-uniform depths. These depths are at a minimum number of points ("inflection points") required to record the temperature curve to an acceptable degree of accuracy. On output, however, the user may request temperature values either at inflection points or interpolated to uniform depth increments.

Summary

Description

This data depicts the social vulnerability of Maine census block groups to environmental hazards. Data were culled primarily from the 2000 Decennial Census.

Summary

Description

MBT data were collected from the USS STURDY in support of the Fleet Observations of Oceanographic Data (FLOOD) project. Data were collected by US Navy; Ships of Opportunity from 07 September 1965 to 28 October 1965. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Summary

Description

Habitat maps of Puerto Rico and the U.S. Virgin Islands were created by visual interpretation of aerial photographs using the Habitat Digitizer Extension. Aerial photographs are valuable tools for natural resource managers and researchers since they provide an excellent record of the location and extent of habitats. However,spatial distortions in aerial photographs due to such factors as camera angle, lens characteristics, and relief displacement must be accounted for during analysis to prevent incorrect measurements of area, distance, and other spatial parameters. These distortions of scale within an image can be removed through orthorectification. During orthorectification, digital scans of aerial photos are subjected to algorithms that eliminate each source of spatial distortion. The result is a georeferenced digital mosaic of several photographs with uniform scale throughout the mosaic. Features near land are generally georeferenced with greater accuracy while the accuracy of features away from land is generally not as good. Where no land is in the original photographic frame only kinematic GPS locations and image tie points were used to georeference the images. After the orthorectified mosaics were created, photointerpreters were able to accurately and reliably delineate boundaries of features in the imagery as they appear on the computer monitor.

Summary

Description

This project is a cooperative effort between the National Ocean Service, National Centers for Coastal Ocean Science, Center for Coastal Monitoring and Assessment, the University of Hawaii, and Analytical Laboratories of Hawaii, LLC. The goal of the work was to develop coral reef mapping methods and compare benthic habitat maps generated by photointerpreting georeferenced color aerial photography, hyperspectral and IKONOS satellite imagery. The enhanced spectral resolution of hyperspectral and control of bandwidths of multispectral data yield an advantage over color aerial photography particularly when coral health and time series analysis of coral reef community structure are of interest. Depending on the type of instrument, a spectral imaging system can be utilized to see multiple colors from ultraviolet through the far infrared range. The AURORA hyperspectral imaging system collected 72 ten nm bands in the visible and near infrared spectral range with a 3 meter pixel resolution. The data was processed to select band widths, which optimized feature detection in shallow and deep water. Photointerpreters can accurately and reliably delineate boundaries of features in the imagery as they appear on the computer monitor using a software interface such as the Habitat Digitizer.