Shrnutí

Popis

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute USGS quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

Shrnutí

Shrnutí

Popis

These data represent data collected from the Shipboard Environmental (data) Acquisition System (SEAS), a program developed by National Oceanic and Atmospheric Administration (NOAA) to provide accurate meteorological and oceanographic data in real time from ships at sea through the use of satellite data transmission techniques. The system transmits data through either the Geostationary Operational Environmental Satellite (GOES) or the International Maritime Satellite Organization (INMARSAT C) satellites to NOAA for use in weather, climatological and ocean models. NOAA is actively participating in an international effort to increase the number of subsurface temperature observations in support of global oceanographic and climate studies. NOAA's Expendable Bathythermograph (XBT) program, SEAS, currently supports about 80 Voluntary Observing Ships (VOS). SEAS XBT data are archived by the National Oceanographic Data Center (NODC) on a weekly basis.

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Popis

MBT data were collected from the USS LOYALTY in support of the Fleet Observations of Oceanographic Data (FLOOD) project. Data were collected by US Navy; Ships of Opportunity from 18 June 1969 to 23 June 1969. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Shrnutí

Popis

Bathythermograph data were collected from the MORGENTHAU within a 1-mile radius of Ocean Weather Station C (5245N 03530W), D (4400N 04100W), and in transit. Data were collected by the United States Coast Guard from 28 March 1970 to 24 June 1970. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Shrnutí

Shrnutí

Popis

This dataset contains a GeoTIFF with 1x1 meter cell size representing the rugosity of a portion of the Virgin Passage, a selected area of seafloor southwest of St. Thomas, USVI, derived from data collected in March and April 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data south of St. Thomas and St. John, USVI, from 3/18/10 to 4/6/09. Data was acquired with a hull-mounted Kongsberg Simrad EM 1002 multibeam echosounder (95 kHz) for water depths greater than 75 meters, and with a moon pool flange-mounted Reson 7125 multibeam echosounder (dual frequecy, 200/400 kHz) for water depths of up to 75 meters. It was processed by a NOAA contractor using CARIS HIPS software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides and zoning from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The processed CARIS data was used to generate a CARIS BASE surface based on CUBE. A BAG file was exported from the BASE surface, and converted to a GeoTIFF in ESRI ArcMap 10. Rugosity was derived from this surface using NOAA?s Benthic Terrain Modeler extension. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependant on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Shrnutí

Shrnutí

Popis

Oceanographic station data were collected from the OWASCO within a 1-mile radius of Ocean Weather Station D (4400N 04100W) and in transit. Data were collected by the United States Coast Guard (USCG) from 24 March 1970 to 12 April 1970. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

Oceanographic station data were collected from the BOUTWELL within a 1-mile radius of Ocean Weather Station C (5630N 05100W) and in transit. Data were collected by the United States Coast Guard (USCG) from 11 April 1970 to 02 May 1970. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2). Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/sd2.html. The SD2 format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity , but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are collected at select nearshore locations, both around islands or banks and within lagoons. Data processing was performed using Seabird Instrument's SeaSoft SBE Data Processing Software (http://www.seabird.com/software/SBEDataProcforWindows.htm). Data format is discreet, tabular (formatted, space delimited ASCII) files for each profile, with a full header as provided by SeaSoft. Raw file extension is HEX, processed file extension is CNV. The header contains latitude, longitude and other location information, as well as all data processing steps and settings. All dates and times are UTC. All positions are WGS84 decimal degrees. Contact Coral Reef Ecosystem Division (CRED), NOAA Pacific Island Fisheries Science Center for more information. http://www.pifsc.noaa.gov/cred/oceanography.php

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The Integrated Science Data Management (ISDM) office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship-of-Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program (WOCE UOT).

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.