Shrnutí

Popis

This dataset has monthly Evaporation data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean, http://www.pmel.noaa.gov/tao/rama/), and PIRATA (Atlantic Ocean, http://www.pmel.noaa.gov/pirata/) arrays of moored buoys which transmit oceanographic and meteorological data to shore in real-time via the Argos satellite system. These buoys are major components of the CLIVAR climate analysis project and the GOOS, GCOS, and GEOSS observing systems. Monthly data is an average of daily values collected during a month. A minimum of 15 daily values are required to compute a monthly average. This dataset contains realtime and delayed mode data (see the 'source' variable). For more information, see http://www.pmel.noaa.gov/tao/proj_over/proj_over.html .

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The Orange Keyhole Sponge, Mycale armata Thiele, was unknown in Hawaii prior to 1996. First reported in Pearl Harbor, it now occurs in virtually every commercial harbor in the main Hawaiian islands, where it can be a major component of the fouling community on harbor piers and jetties. It has been reported from a few coral reef locations near harbors, but in Kaneohe Bay it has become a major component of the benthic biota in the south bay in the last 5-10 years. A study was conducted in 2004-2005 to determine Mycale armata's distribution, abundance throughout the bay, its growth rates on permanent quadrats, and whether mechanical removal would be an effective management technique for its control. Results from 190 manta board surveys on 28 reefs and paired 25 m belt transects using photo quadrats on 19 reefs indicated that the sponge had maximal coverage in the south-central part of the bay, in the vicinity of Coconut Island.

Shrnutí

Popis

Counts of primarily planktonic foraminifera from Dr. W.F. Ruddiman and staff at the Lamont-Doherty Earth Observatory of Columbia University are included in these files. Some diatom observations made by Dr. C. Sancetta of LDEO are also included. The data set consists of approximately 35 files of faunal counts including core id., latitude, longitude, water depth, and appropriate transfer function. Data also include depth in core, count of total species, total abundance, case condition for count, core type code, and faunal code. A taxonomic overview is included, along with complete documentation. Associated Sea Surface temperature estimates are also included. These data were originally submitted to NOAA's National Geophysical Data Center (NGDC) for archive and subsequently transferred to NOAA's National Climatic Data Center (NCDC) Paleoclimatology Group for stewardship. These data are available for direct download from NCDC.

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

Benthic habitat maps of the nearshore marine environment of Vieques, Puerto Rico were created by visual interpretation of remotely sensed imagery. The objective of this effort, conducted by NOAA's Center for Coastal Monitoring and Assessment - Biogeography Branch in partnership with NOAA's Office of Response and Restoration, was to provide spatially-explicit information on the habitat types, biological cover and live coral cover of Vieques' coral reef ecosystem. The data described herein represent ground validation (GV) sites explored by NOAA field scientists to further refine habitat map classification.

Shrnutí

Popis

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR) as the long-term archive for the International Global Argo Project (for additional information about Argo, see http://www.argo.ucsd.edu/ (last accessed July 2005)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity, as well as related conductivity and/or pressure measurements (if any), collected by Argo profiling floats.

Shrnutí

Popis

Temperature profile data were collected using bathythermograph (BT/XBT) casts from QUEENS WAY BRIDGE in the Pacific Ocean from January 1, 1977 to January 9, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Shrnutí

Popis

NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to understand and predict changes in Earth's environment, and conserve and manage coastal and marine resources to meet our Nation's economic, social, and environmental needs. They can be used for modeling of coastal processes (tsunami inundation, storm surge, sea-level rise, contaminant dispersal, etc.), ecosystems management and habitat research, coastal and marine spatial planning, and hazard mitigation and community preparedness.

Shrnutí

Shrnutí

Popis

This dataset contains an ESRI Grid with 10 meter cell size representing the bathymetry of the south shore of St. Thomas, US Virgin Islands. NOAA's NOS/NCCOS/CCMA Biogeography Team and NOAA/NOS/OCS/HSD personnel, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in the US Virgin Islands from 2/18/04 to 3/5/04. Data was acquired with a pole-mounted Reson 8101 ER multibeam echosounder (240 kHz) and processed by a NOAA contractor using CARIS HIPS v5.4 software. Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum WGS84. The processed CARIS data was used to generate a CARIS BASE surface based on swath angle with footprint size 3*3. An ASCII XYZ file was exported from the BASE surface and opened in ESRI ArcMap 9 as an XY event. Then the ArcToolbox conversion tool 'Feature to Raster', with cell size 10, was used to generate the final ESRI Grid. While the project was conducted to meet IHO Order 2 accuracy standards, there is a roll artifact (averaging 0.5m high) in the dataset that the user should take into consideration when performing any analysis.

Shrnutí

Popis

This data set was collected as part of the Joint Monitoring Program during seismic activities in the Chukchi Sea. The 2006 data was collected by ship and aircraft as part of the Joint Monitoring Program during seismic activities in the Chukchi Sea in summer and fall of 2006. The 2007 data was collected by ship as part of the Marine Mammal Monitoring and Mitigation During Open Water Seismic Exploration program in summer and fall of 2007. The objective of the surveys was to update data on distribution and relative abundance of marine mammals in coastal areas of the eastern Chukchi Sea during the open-water season.

Shrnutí

Popis

Temperature profile data were collected using bathythermograph (BT/XBT) casts from QUEENS WAY BRIDGE in the Pacific Ocean from June 14, 1977 to June 23, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Shrnutí

Popis

To support a long-term NOAA Coral Reef Conservation Program (CRCP) for sustainable management and conservation of coral reef ecosystems, from 20140325 to 20140518, reef fish assessment surveys were conducted, as a part of Rapid Ecological Assessments (REA), during the Pacific Reef Assessment and Monitoring Program (RAMP) Cruise HA1401 in the Mariana Archipelago region by the Coral Reef Ecosystem Division (CRED) at the NOAA Pacific Islands Fisheries Science Center (PIFSC). During the cruise, 21 REA sites were surveyed at Asuncion in the Mariana Archipelago region. At each REA site, fish biologists entered the water and conducted a fine-scale (~700 m^2) and high degree of taxonomic resolution REA survey to assess and monitor species diversity, size distribution, and abundance of fish in shallow-water hard-bottom (less than 30 m) habitats. Reef fish assessment surveys were focused on cataloging the diversity (species richness), abundance (numeric density) and biomass (fish mass per unit area) of diurnally active reef fish assemblages. The stationary point count (SPC) method was used to quantify reef fish species. Two divers lay out a 30 m transect line, and position themselves at the 7.5 and 22.5 meter marks. The SPC biologist then records estimated size and abundance of all fish within a visually estimated 15-m diameter cylinder centered on the stationary diver (7.5-m radius, total area ~ 177m^2 per cylinder). The diver first spends 5 minutes identifying all fish species in the cylindrical area, then proceeds to count and estimate size (total length) for each in a series of "instantaneous" point counts or sweeps of the cylinder. Fish were identified at the species level, wherever possible. All reef-associated fish, including those in the water column, were surveyed. The survey time for each stationary point count survey was approximately 20 min and generally four stationary point count surveys (two per diver) were conducted at each fish REA site. After completing REA surveys, divers noted the presence, at the survey site, of any unusual fish species not counted during SPC counts, in order to facilitate species lists per location.

Shrnutí

Popis

The Integrated Science Data Management (ISDM) office processes oceanographic profiles reported for the world oceans in near real-time from the Global Telecommunications System (GTS) for the Global Temperature and Salinity Profile Program (GTSPP). These data also support the activities of the Ship-of-Opportunity Programme Implementation Panel (SOOPIP) and the WOCE Upper Ocean Thermal Program (WOCE UOT).

Shrnutí

Popis

Temperature profile data were collected using bathythermograph (BT/XBT) casts from QUEENS WAY BRIDGE in the Pacific Ocean from March 18, 1977 to March 26, 1977. Data were submitted by Scripps Institution of Oceanography as part of the Thermal Structure Monitoring Program in the Pacific (TRANSPAC) project. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full BT descriptions are available at http://www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points (''inflection points'') required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m.

Shrnutí

Popis

This data set is part of a larger set of data called the MultiBeam Bathymetric Data Base (MBBDB) where other similar data can be found at http://maps.ngdc.noaa.gov/viewers/multibeam/

Shrnutí

Popis

This dataset has 5-day Total Heat Flux data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian Ocean, http://www.pmel.noaa.gov/tao/rama/), and PIRATA (Atlantic Ocean, http://www.pmel.noaa.gov/pirata/) arrays of moored buoys which transmit oceanographic and meteorological data to shore in real-time via the Argos satellite system. These buoys are major components of the CLIVAR climate analysis project and the GOOS, GCOS, and GEOSS observing systems. 5-day data is an average of daily values collected during consecutive five day intervals. A minimum of 2 daily values are required to compute a 5-day average. This dataset contains realtime and delayed mode data (see the 'source' variable). For more information, see http://www.pmel.noaa.gov/tao/proj_over/proj_over.html .

Shrnutí

Popis

This dataset contains vessel- and aircraft-based mammal sightings data and associated environmental data collected in the Chukchi and Beaufort seas during the open water season 2006-2010. The aerial data are derived from marine mammal observers aboard aircrafts flown at 1000 ft to 1500 ft. The data contains marine mammal sightings data and associated environmental data collected during the open water season 2006-2010 (excluding 2009) in Chukchi Sea and Beaufort Sea. In addition, this metadata describes aerial navigational GPS data recorded during observations. Data collection methods changed slightly between years. The metadata for each attribute should be studied carefully before these data are used for analyses.