Shrnutí

Popis

Bathythermograph data were collected from the COOK INLET within a 1-mile radius of Ocean Weather Station B (56305N 05100W) and in transit. Data were collected by the United States Coast Guard from 22 March 1962 to 13 April 1962. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Popis

CRED shallow Conductivity-Temperature-Depth (CTD) casts are vertical profiles (max 30 meter depth, downcast only) of temperature, conductivity and pressure. Data are collected at select nearshore locations, both around islands or banks and within lagoons. Data processing was performed using Seabird Instrument's SeaSoft SBE Data Processing Software (http://www.seabird.com/software/SBEDataProcforWindows.htm). Data format is discreet, tabular (formatted, space delimited ASCII) files for each profile, with a full header as provided by SeaSoft. Raw file extension is HEX, processed file extension is CNV. The header contains latitude, longitude and other location information, as well as all data processing steps and settings. All dates and times are UTC. All positions are WGS84 decimal degrees. Contact Coral Reef Ecosystem Division (CRED), NOAA Pacific Island Fisheries Science Center for more information. http://www.pifsc.noaa.gov/cred/oceanography.php

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

This data set consists of land derived from high resolution imagery and was analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine land cover. This data set utilized 43 full or partial Quickbird multispectral scenes which were processed to detect C-CAP land cover features on the island of Molokai.

Shrnutí

Popis

Fish larvae counts and standardized counts for larvae captured in CalCOFI icthyoplankton nets (primarily vertical [Calvet or Pairovet], oblique [bongo or ring nets], and surface tows [Manta nets]). Surface tows are normally standardized to count per 1,000 m3 strained. Oblique tows are normally standardized to count per 10 m2 of surface sampled. This table includes all tows by species, even if zero larvae were captured for the species, i.e., negative tows. The "Larvae Counts Positive Tows" table includes only tows where one or more larvae were captured for the species selected by the user.

Shrnutí

Popis

MODIS measures photosynthetically available radiation that may be used to mode primary productivity. THIS IS AN EXPERIMENTAL PRODUCT: intended strictly for scientific evaluation by professional marine scientists.

Shrnutí

Popis

The NOAA National Centers for Environmental Information (formerly National Geophysical Data Center) receives the K indices on a current basis from approximately 85 observatories. The K index is a quasi-logarithmic local index of the 3-hourly range in magnetic activity relative to an assumed quiet-day curve for the recording site. First introduced by J. Bartels in 1938, it consists of a single digit 0 through 9 for each 3-hourly interval. The K indices are received on a monthly basis from the various observatories and are available from 1938 to present. The NOAA National Centers for Environmental Information (formerly National Geophysical Data Center) also receives KP indices from the Institute for Geophysik in Gottingen, Germany on a monthly basis. The KP index is a planetary index based on the K index from 12 or 13 selected stations and has been derived routinely from 1932.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Shrnutí

Popis

This project is a cooperative effort among the National Ocean Service, National Centers for Coastal Ocean Science, Center for Coastal Monitoring and Assessment; the University of Hawaii; BAE Systems Spectral Solutions; and Analytical Laboratories of Hawaii, LLC. The goal of the work was to incorporate previously developed mapping methods to produce coral reef habitat maps for American Samoa, Guam and the Commonwealth of the Northern Mariana Islands. GPS field observations were used to establish the thematic accuracy of this thematic product. 1113 benthic habitat characterizations were completed for this work.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

NASA's Jet Propulsion Laboratory (JPL) distributes science quality wind velocity data from the SeaWinds instrument onboard NASA's QuikSCAT satellite. SeaWinds is a microwave scatterometer designed to measure surface winds over the global ocean. Wind velocity fields are provided in zonal, meriodonal, and modulus sets. The reference height for all wind velocities is 10 meters.

Shrnutí

Popis

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR) as the long-term archive for the International Global Argo Project (for additional information about Argo, see http://www.argo.ucsd.edu/ (last accessed December 2006)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity, as well as related conductivity and/or pressure measurements (if any), collected by Argo profiling floats.

Shrnutí

Popis

This image represents a 4 meter resolution interpolated bathymetric grid of a seamount East of Fajardo, Puerto Rico. NOAA's NOS/NCCOS/CCMA Biogeography Team, in collaboration with NOAA vessel Nancy Foster and territory, federal, and private sector partners, acquired multibeam bathymetry data in and around the Northeast Reserve from 3/05/2013 to 3/29/2013. Data was acquired with a hull mounted Kongsberg EM1002 multibeam echosounder (95 kHz) and processed by a NOAA contractor using CARIS HIPS software, applying all relevant correctors (attitude, sound velocity, absorption coefficient). Data has all correctors applied (attitude, sound velocity) and has been reduced to mean lower low water (MLLW) using final approved tides from NOAA COOPS. Data is in UTM zone 20 north, datum NAD83. The bathymetry data were geometrically and radiometrically corrected using Hypack 2013 acquisition software. The project was conducted to meet IHO Order 1 and 2 accuracy standards, dependent on the project area and depth. All users should individually evaluate the suitability of this data according to their own needs and standards.

Shrnutí

Shrnutí

Popis

NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated bathymetric-topographic DEMs are used to support tsunami forecasting and modeling efforts at the NOAA Center for Tsunami Research, Pacific Marine Environmental Laboratory (PMEL). The DEMs are part of the tsunami forecast system SIFT (Short-term Inundation Forecasting for Tsunamis) currently being developed by PMEL for the NOAA Tsunami Warning Centers, and are used in the MOST (Method of Splitting Tsunami) model developed by PMEL to simulate tsunami generation, propagation, and inundation. Bathymetric, topographic, and shoreline data used in DEM compilation are obtained from various sources, including NGDC, the U.S. National Ocean Service (NOS), the U.S. Geological Survey (USGS), the U.S. Army Corps of Engineers (USACE), the Federal Emergency Management Agency (FEMA), and other federal, state, and local government agencies, academic institutions, and private companies. DEMs are referenced to the vertical tidal datum of Mean High Water (MHW) and horizontal datum of World Geodetic System 1984 (WGS84). Grid spacings for the DEMs range from 1/3 arc-second (~10 meters) to 3 arc-seconds (~90 meters).

Shrnutí

Shrnutí

Shrnutí

Popis

NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated bathymetric-topographic DEMs are used to support tsunami forecasting and modeling efforts at the NOAA Center for Tsunami Research, Pacific Marine Environmental Laboratory (PMEL). The DEMs are part of the tsunami forecast system SIFT (Short-term Inundation Forecasting for Tsunamis) currently being developed by PMEL for the NOAA Tsunami Warning Centers, and are used in the MOST (Method of Splitting Tsunami) model developed by PMEL to simulate tsunami generation, propagation, and inundation. Bathymetric, topographic, and shoreline data used in DEM compilation are obtained from various sources, including NGDC, the U.S. National Ocean Service (NOS), the U.S. Geological Survey (USGS), the U.S. Army Corps of Engineers (USACE), the Federal Emergency Management Agency (FEMA), and other federal, state, and local government agencies, academic institutions, and private companies. DEMs are referenced to the vertical tidal datum of Mean High Water (MHW) and horizontal datum of World Geodetic System 1984 (WGS84). Grid spacings for the DEMs range from 1/3 arc-second (~10 meters) to 3 arc-seconds (~90 meters).

Shrnutí

Shrnutí

Popis

To support NOAA Coral Reef Conservation Program (CRCP) long-term goals for sustainable management and conservation of coral reef ecosystems, towed-diver surveys (aka. towboard surveys) were conducted by the Coral Reef Ecosystem Division (CRED) of the NOAA Pacific Islands Fisheries Science Center (PIFSC) as part of biennial Pacific Reef Assessment and Monitoring Program (RAMP) Cruises. 15 towboard surveys (34.4891 km in length), were conducted at Midway Atoll during the NW Hawaiian Islands RAMP Cruise TC0207 from 8 September - 7 October 2002. Towboard surveys are a good method for obtaining a general description of large reef areas, assessing the status of low-density populations of large-bodied reef fish, large-scale disturbances (e.g., bleaching), general distribution and abundance patterns of macro-invertebrates (e.g., COT, giant clams), and for assessing trends in these populations and metrics. A pair of scuba divers (1 fish and 1 benthic diver) are towed 60 m behind a small survey launch at a speed of 1-2 knots and a depth of approximately 15m. Each survey is 50 min long, covers about 2 km of habitat, and is divided into ten 5-minute survey segments. The fish diver records, to the lowest possible taxon, all large-bodied reef fishes (>50cmTL) seen within 5m either side and 10m in front of the towboard. Length of each individual is estimated to the nearest cm. The fish towboard is also outfitted with a forward-facing digital video camera to record the survey swath. The benthic diver records percent cover of coral and macroalgae, estimates benthic habitat type and complexity, and censuses a suite of benthic macroinvertebrates including Crown of Thorns sea stars and sea urchins. The benthic towboard is equipped with a downward-facing digital still camera which images the benthos at 15 second intervals. These images are analyzed for percent cover of coral, algae, and other benthic components. Both towboards are equipped with SEABIRD SBE-39 temperature/depth sensors set to record at 5 second intervals. Latitude and longitude of each survey track is recorded at 15 second intervals using a Global Positioning System (GPS) receiver onboard the tow boat. A layback algorithm is applied to more accurately map the position of the divers with respect to the reef environment. This algorithm calculates the position of the divers based on the position of the tow boat taking into account the length of the tow rope, the depth of the divers, and the curvature of the survey track. This metadata applies to the benthic characterization observations.

Shrnutí

Shrnutí

Popis

NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated bathymetric-topographic DEMs are used to support tsunami forecasting and modeling efforts at the NOAA Center for Tsunami Research, Pacific Marine Environmental Laboratory (PMEL). The DEMs are part of the tsunami forecast system SIFT (Short-term Inundation Forecasting for Tsunamis) currently being developed by PMEL for the NOAA Tsunami Warning Centers, and are used in the MOST (Method of Splitting Tsunami) model developed by PMEL to simulate tsunami generation, propagation, and inundation. Bathymetric, topographic, and shoreline data used in DEM compilation are obtained from various sources, including NGDC, the U.S. National Ocean Service (NOS), the U.S. Geological Survey (USGS), the Canadian Hydrographic Service (CHS), the Puget Sound Lidar Consortium (PSLC), the Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX), Canadian Digital Elevation Data (CDED) and other international, federal, state, and local government agencies, academic institutions, and private companies. DEMs are referenced to the vertical tidal datums of Mean High Water (MHW) and North American Vertical Datum of 1988 (NAVD 88) and horizontal datum of World Geodetic System 1984 (WGS 84). Grid spacings for the DEMs range from 1/3 arc-second (~10 meters) to 3 arc-seconds (~30 meters).