Shrnutí

Popis

Bathythermograph data were collected from the DUANE within a 1-mile radius of Ocean Weather Station D (4400N 04100W) and in transit. Data were collected by the United States Coast Guard from 28 March 1962 to 22 April 1962. The platform was equipped and staffed to observe weather and sea conditions. Data were processed by NODC to the NODC standard Universal Bathythermograph Output (UBT) format. Full format description is available from NODC at www.nodc.noaa.gov/General/NODC-Archive/bt.html. The UBT file format is used for temperature-depth profile data obtained using the mechanical bathythermograph (MBT) instrument. The maximum depth of MBT observations is approximately 285 m. Therefore, MBT data are useful only in studying the thermal structure of the upper layers of the ocean. Cruise information, date, position, and time are reported for each observation. The data record comprises pairs of temperature-depth values. Temperature data in this file are recorded at uniform 5 m depth intervals.

Shrnutí

Shrnutí

Shrnutí

Popis

This lidar dataset encompasses two areas in northwest Oregon. The northern area is located in Clatsop County, encompassing Clatsop State Forest ownership; the southern area is located in Tillamook, Washington and Yamhill Counties, encompassing areas of the Tillamook State Forest. The LiDAR data was collected April 25-28, May 1 and May 3-9, 2007. The lidar data are multiple return and bare earth classified. The survey used a Leica ALS50 Pase II laser system mounted in a Cessna Caravan 208. LiDAR flight lines have been examined to ensure that there was at least 50% sidelap, there are no gaps between flightlines, and overlapping flightlines have consistent elevation values. Near nadir scan angles were used to increase penetration of vegetation to ground surfaces. Ground level GPS and aircraft IMU were collected during the flight. Elevation values for open water surfaces are not valid elevation values because few LiDAR points are returned from water surfaces. Watershed Sciences, Inc. collected the LiDAR and created this data set for the Oregon Department of Forestry and the Puget Sound LiDAR Consortium.

Shrnutí

Shrnutí

Shrnutí

Popis

This delivery contains point cloud data in LAS 1.2 format, with Absolute GPS Timestamps. No classification has been completed on these data. The nominal point spacing is 1.2 meters. The following are the collection parameters and equipment used to create this data set: Aircraft: Piper Navajo (N6GR) and Cessna 320 (N3443Q) Lidar System: Optech ALTM Gemini (03SEN145 and 07SEN201) Approximate Collection Altitude (Above Mean Terrain): 1800 meters Ground Speed: 150 kts Pulse Rate Frequency: 70 kHz Mirror Scan Frequency: 32 Hz Scan Angle (+/-): 20 degrees Beam Divergence: Narrow (0.25 mrad) Accuracy statements are based on areas of moderate terrain, with points temporarily classified as ground. Diminished accuracies are to be expected in areas of extreme terrain and dense vegetation. The accuracy of each point is expected to meet the vertical accuracy standard, derived products may be less accurate in areas of extreme terrain and dense vegetation due to a lesser number of points defining the ground in these areas.

Shrnutí

Popis

The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR) as the long-term archive for the International Global Argo Project (for additional information about Argo, see http://www.argo.ucsd.edu/ (last accessed March 2006)). Argo data archived by the US NODC on a weekly basis starting the second quarter of FY 2003, may include real-time and/or delayed-mode profiles of ocean temperature and salinity, as well as related conductivity and/or pressure measurements (if any), collected by Argo profiling floats.

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Shrnutí

Popis

The Orange Keyhole Sponge, Mycale armata Thiele, was unknown in Hawaii prior to 1996. First reported in Pearl Harbor, it now occurs in virtually every commercial harbor in the main Hawaiian islands, where it can be a major component of the fouling community on harbor piers and jetties. It has been reported from a few coral reef locations near harbors, but in Kaneohe Bay it has become a major component of the benthic biota in the south bay in the last 5-10 years. A study was conducted in 2004-2005 to determine Mycale armata's distribution, abundance throughout the bay, its growth rates on permanent quadrats, and whether mechanical removal would be an effective management technique for its control. Results from 190 manta board surveys on 28 reefs and paired 25 m belt transects using photo quadrats on 19 reefs indicated that the sponge had maximal coverage in the south-central part of the bay, in the vicinity of Coconut Island.

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

The National Oceanic and Atmospheric Administration (NOAA) has the statutory mandate to collect hydrographic data in support of nautical chart compilation for safe navigation and to provide background data for engineers, scientific, and other commercial and industrial activities. Hydrographic survey data primarily consist of water depths, but may also include features (e.g. rocks, wrecks), navigation aids, shoreline identification, and bottom type information. NOAA is responsible for archiving and distributing the source data as described in this metadata record.

Shrnutí

Popis

These data represent data collected from the Shipboard Environmental (data) Acquisition System (SEAS), a program developed by National Oceanic and Atmospheric Administration (NOAA) to provide accurate meteorological and oceanographic data in real time from ships at sea through the use of satellite data transmission techniques. The system transmits data through either the Geostationary Operational Environmental Satellite (GOES) or the International Maritime Satellite Organization (INMARSAT C) satellites to NOAA for use in weather, climatological and ocean models. NOAA is actively participating in an international effort to increase the number of subsurface temperature observations in support of global oceanographic and climate studies. NOAA's Expendable Bathythermograph (XBT) program, SEAS, currently supports about 80 Voluntary Observing Ships (VOS). SEAS XBT data are archived by the National Oceanographic Data Center (NODC) on a weekly basis.